Soft panniers retaining pin

Share your bling. Latest Alums, topbox, alarms, gel seat...
User avatar
jhalfhide
675cc
675cc
Posts: 258
Joined: Sat Jun 25, 2016 3:39 pm
Country: United Kingdom
City: East Sussex
Year: 2013
Colour: Black & Orange
Contact:

Re: Soft panniers retaining pin

Post by jhalfhide » Wed May 09, 2018 3:14 pm

Qlan wrote:Ah, perfect! So i just use the two connecting points on the frame then? Thought it needed a connection at the footpegs aswell, since theres a "Hook" there on the sidebags to connect to the footpegs (or footpeg-holder - i dont know the name :) ). Thanks, its better to ask someone who knows, rather than trying it and them falling off in the middle of the road!
Image looking at the pic of my bike, zero connection to the footpegs.



Sent from my iPhone using Tapatalk
Now: 2013 KTM 990 SMT
Old: 2010 Ducati Faultistrada 1200s (Broke)
Old: 2007 Yamaha R1 (Sold)
Old: 2009 KTM 990 SMR (Stolen)
Old: 2008 Ducati 848 (Written off... whilst parked :roll: )
Old: 2007 ZX6R (Written off... elderly driver)
Old: 1996 ZX6R (Sold)

Qlan
125cc
125cc
Posts: 8
Joined: Fri Aug 11, 2017 1:09 pm
Country: Norway
City: Drammen
Year: 2017
Colour: Black

Re: Soft panniers retaining pin

Post by Qlan » Wed May 09, 2018 6:00 pm

Thanks! Just mounted them to my bike, feels ok - even though im a bit skeptical about the not having a connection a bit lower as this being a 2017 SDR and the brackets are a bit different! But hopefully it will work just fine! Thanks for the help :)
´17 SDR Black
´18 Husqvarna 701 Enduro w/ Akra Race setup.

User avatar
jhalfhide
675cc
675cc
Posts: 258
Joined: Sat Jun 25, 2016 3:39 pm
Country: United Kingdom
City: East Sussex
Year: 2013
Colour: Black & Orange
Contact:

Re: Soft panniers retaining pin

Post by jhalfhide » Wed May 09, 2018 8:00 pm

Qlan wrote:Thanks! Just mounted them to my bike, feels ok - even though im a bit skeptical about the not having a connection a bit lower as this being a 2017 SDR and the brackets are a bit different! But hopefully it will work just fine! Thanks for the help :)
In that case, wrong forum section. Hence why my pic shows 990 mounts Image


Sent from my iPhone using Tapatalk
Now: 2013 KTM 990 SMT
Old: 2010 Ducati Faultistrada 1200s (Broke)
Old: 2007 Yamaha R1 (Sold)
Old: 2009 KTM 990 SMR (Stolen)
Old: 2008 Ducati 848 (Written off... whilst parked :roll: )
Old: 2007 ZX6R (Written off... elderly driver)
Old: 1996 ZX6R (Sold)

CatDaddysBBQ
125cc
125cc
Posts: 20
Joined: Fri May 20, 2016 2:55 pm
Country: United States
City: North Aurora
Year: 2010
Colour: Black & Orange
Model: SMT

Re: Soft panniers retaining pin

Post by CatDaddysBBQ » Mon May 14, 2018 8:42 pm

They mount in 3 points:
2 plastic loops built into the top edge of the pannier(s) slide onto two 'fingers' on the mounting bracket over the heat shield. Then, the 3rd (where the spring loaded latch/thingie goes) clicks into a receiver at the bottom of the black support bracket. The pegs don't come into play at all, as others have said.
Last edited by CatDaddysBBQ on Mon May 14, 2018 8:43 pm, edited 1 time in total.

Hardyrider
125cc
125cc
Posts: 7
Joined: Mon May 28, 2018 1:21 pm
Country: United Kingdom
City: Wiltshire
Year: 2012
Model: SMT

Re: Soft panniers retaining pin

Post by Hardyrider » Sat Jun 16, 2018 8:52 pm

Guys I’ve just bought the two sets of pins on eBay for less than £15, take a look at the pictures and do a search on eBay for index plunger pins. ImageImage


Sent from my iPad using Tapatalk

Post Reply