ACC1 and ACC2

Share your bling. Latest Alums, topbox, alarms, gel seat...
Post Reply
VMac
125cc
125cc
Posts: 20
Joined: Tue Jun 29, 2010 6:15 pm
Country: Canada
City: Toronto
Year: 2010

ACC1 and ACC2

Post by VMac » Sun Jul 18, 2010 1:16 pm

Just wired in my GPS and thought I'd share some info. The SMT has two accessory access points - ACC1 and ACC2. The former is unswitched and the latter is switched by the ignition. Unlike on my previous 950 Adventure, you don't have to root around in the headlight shell to find the plugs. On the right side of the headstock, on the inside surface of the fairing, there is an access panel that simply pops out and the female spade lugs are in there, clearly labeled. The brown wires are ground.

Cheers
There are 10 kinds of people in the world - those that understand binary and those that don't.

Broop
125cc
125cc
Posts: 25
Joined: Sun Oct 31, 2010 8:17 pm
Country: USA
City: Dallas
Year: 2010

Re: ACC1 and ACC2

Post by Broop » Sun Oct 31, 2010 8:28 pm

Thanks for that, I just got my GPS and have been reading the installation instructions while I wait for the SW Motech mount

Cheers from Dallas Texas,
Barry
There will be no estate sale
I am going to be buried with them
----------------------------------------
2010 SMT Orange (the fastest color)
2011 EXC W 300
2011 BMW K1300S
2011 BMW R1200 GSA

Broop
125cc
125cc
Posts: 25
Joined: Sun Oct 31, 2010 8:17 pm
Country: USA
City: Dallas
Year: 2010

Re: ACC1 and ACC2

Post by Broop » Sun Oct 31, 2010 8:46 pm

Thanks for that, I just got my GPS and have been reading the installation instructions while I wait for the SW Motech mount

Cheers from Dallas Texas,
Barry
There will be no estate sale
I am going to be buried with them
----------------------------------------
2010 SMT Orange (the fastest color)
2011 EXC W 300
2011 BMW K1300S
2011 BMW R1200 GSA

hbc
125cc
125cc
Posts: 9
Joined: Tue Nov 16, 2010 2:06 am
Country: USA
City: franklin, nc
Year: 2010

Re: ACC1 and ACC2

Post by hbc » Tue Nov 16, 2010 3:33 pm

Thanks for the information. My assumption is that it's probably best to wire the GPS using the ACC2 connector where power's activated through the ignition (because having constant power [using the ACC1 connector] going to the GPS would unnecessarily drain the battery). Is this correct?
HBC

User avatar
dancerdave
Moderator
Moderator
Posts: 704
Joined: Wed Oct 06, 2010 7:19 pm
Country: Northern Ireland
City: Larne
Year: 2010
Location: Larne, Northern Ireland

Re: ACC1 and ACC2

Post by dancerdave » Tue Nov 16, 2010 4:03 pm

Yes you,re correct. I'll use that for the zumo and the heated grips i'm going to get as well.
Dave
2012 F800GS Triple Black
2005 BMW 1150 GSA SE

SM-T NOW SOLD

hbc
125cc
125cc
Posts: 9
Joined: Tue Nov 16, 2010 2:06 am
Country: USA
City: franklin, nc
Year: 2010

Re: ACC1 and ACC2

Post by hbc » Tue Nov 16, 2010 4:09 pm

Great. Thanks for the info!

OZMAN
125cc
125cc
Posts: 5
Joined: Sat Nov 27, 2010 6:08 am
Country: australia
City: perht
Year: 2010
Colour: Silver

Re: ACC1 and ACC2

Post by OZMAN » Wed Jan 26, 2011 6:18 am

I read the posts re. the access panel for the accessory plugs and pulled off the panel, but despite close examination, there does not seem to be the two plugs everyone else refers to.

My smt is "09 and in australia. Maybe the panel is upside down as well?

Anyone any clues

ozman

LouP
250cc
250cc
Posts: 68
Joined: Wed Jul 21, 2010 6:13 am
Country: Ausralia
City: Adelaide
Year: 2009
Colour: Silver

Re: ACC1 and ACC2

Post by LouP » Thu Jan 27, 2011 2:04 am

You may have to take the front mask off after taking the 2 sides off to find them. But first try by removing RHS side mask panel off, and fishing around in there with a torch, mine is an 09 and there in there for sure.
Leo Vince Cans, 16T sprocket, Throttle cam, Rad Guard, Skid plate, Crash bars, Axle protectors, Tall screen, LED Tail light, Custom seat, Soft panniers,Top box, Tank bag, 12 volt outlet, Fender Extender,Skidmarx hugger, Scottoiler, And a wish list.

OZMAN
125cc
125cc
Posts: 5
Joined: Sat Nov 27, 2010 6:08 am
Country: australia
City: perht
Year: 2010
Colour: Silver

Re: ACC1 and ACC2

Post by OZMAN » Thu Jan 27, 2011 5:26 am

hi LouP,

thanks again, just found the little buggers. It's all about belief giving perseverance.

cheers

ozman

Jspr
50cc
50cc
Posts: 2
Joined: Sun Aug 15, 2010 10:14 pm
Country: Finland
City: Espoo
Year: 2010

Re: ACC1 and ACC2

Post by Jspr » Mon May 09, 2011 9:14 pm

This pic that i found at another forum really helped me to find them...
http://i654.photobucket.com/albums/uu26 ... 010084.jpg

Hallstar
Supporter
Supporter
Posts: 62
Joined: Thu Apr 28, 2016 9:52 pm
Country: UK
City: Cullompton, Devon
Year: 2012
Colour: White
Model: SMT

Re: ACC1 and ACC2

Post by Hallstar » Sat Jul 09, 2016 10:59 am

Reviving an old thread... Can anyone tell me if there are any dedicated switched accessory points at rear of SMT?
Speed is compulsory, Limits are optional

We're not Gods, we're Englishmen, the next best thing

Real men ride twins

User avatar
passiv
250cc
250cc
Posts: 53
Joined: Sun May 01, 2016 10:49 pm
Country: Slovakia
City: Bratislava
Year: 2011
Model: SMT

Re: ACC1 and ACC2

Post by passiv » Mon Feb 20, 2017 11:48 am

I've found someone was messing with electric cables on my bike and i failed to find the 'clearly labeled' ACC1 and ACC2 plugs.

Does anyone have an idea as witch ACC plug this is?
Image

Post Reply