Superduke GT sat nav Install

[BillyRay123]

Hi all, I have just bought a 2017 superduke gt which came with the power parts touring kit. I have bought a tom tom rider sat nav and needs to be hard wired. Can anyone direct me on how to install please? The fixing kit looks pretty easy but do I need to take any of the fairing off? For the wiring loom I saw a video that showed there's some accessory cables on the left hand of the seat, I can find them so would be great full for your advice.

All the best
BillyRay

[MarkLH69]

Hi all, I have just bought a 2017 superduke gt which came with the power parts touring kit. I have bought a tom tom rider sat nav and needs to be hard wired. Can anyone direct me on how to install please? The fixing kit looks pretty easy but do I need to take any of the fairing off? For the wiring loom I saw a video that showed there's some accessory cables on the left hand of the seat, I can find them so would be great full for your advice.

All the best
BillyRay

There is a 12v power outlet on the left side of the instruments, behind the screen.

Sent from my SM-T800 using Tapatalk

[BillyRay123]

Thanks for the response, sadly with the tom tom the mount for the bike is only hard wired, although it comes with a cigarette charger and car kit it wouldn't work on the bike as the fixing plate is different, was hoping I could have just used the socket you mentioned but not sure I can with this sat nav

[GaryCulb]

Look in your 2017 KTM SDGT manual on p173. You will see that when you remove the instrument panel/ cluster (3 screws & unplug) you find the front ACC1 & ACC2. I have not utilized or checked them but in the past Brown is ground, Red & Black is switched power. The other connection I believe is constant power from the battery.

I ran the power to my NavVI from a PDM60 because, I had several extra electrical accessories.

Best,

Doc



PS: You also have an rear power supplies ACC1 & ACC2 which are located on the right next to the passenger seat lock. It is on p174 of your 2017 KTM SDGT manual.

[BillyRay123]

Superstar thanks very much for the advice, I'll get it done over the weekend and let you know how I get on!

[MarkLH69]

Superstar thanks very much for the advice, I'll get it done over the weekend and let you know how I get on!

That sounds better. Do you need to buy a KTM GPS mount for the TomTom, or does it come with one that fits ?

Sent from my Nexus 5X using Tapatalk

[BillyRay123]

I bought the ktm gps mount so I'm all good to go now, sure from what you've sent is on my skill set so happy days haha

[BillyRay123]

Hi doc, hope your well? Will these fit?

https://www.maplin.co.uk/p/maplin-minia ... pack-n10hu

[GaryCulb]

Do not know. But, looks like the correct electrical connection. Best,

Doc

[BillyRay123]

Managed to get the sat nav fitted, used acc2 which is the ignition powered connection. Red and black cable was positive and the brown was negative.

Really easy job, thanks for the input everyone. Tried to upload a pic but it comes up with an error.

[GaryCulb]

BillyRay123,

Glad it worked out. Did you use the Maplin Miniature Male Spade Connector?? Wonder what would be a similar product avaliable in the USA that would work on the KTM ACC electrical connections??

For photo's I use SMUG (https://www.smugmug.com). One of the Avid Rider Forum guys assited in setting the site up & owns part of it. Best,

Doc

[BillyRay123]

It wasn't the mini ones it was these....

https://www.maplin.co.uk/p/maplin-insul ... blue-jh90x

Amazon will sell them for sure or your local components shop....

I'll have a look at the photo share-thanks.

[BillyRay123]

Couple of pics...

[TUBSY]

hi is that the lockable sat nav when I fitted mine with the lockable bit on it
was marking the screen when you altered the screen height

[MarkLH69]

Couple of pics...

Looks great, on my to do list. I tried a zip up bar mount for my phone, but it overheats and shuts down. My bike is mostly commuting though, so it's hard to justify the $

Sent from my SM-T800 using Tapatalk

[GaryCulb]

Went out & tried male spade connectors to ACC1 & ACC2 electical connections under the rear seat. The standard red or blue spad electical male connector works. Found this set on Amazon with the spad electical male connector ( https://www.amazon.com/Accessbuy-Insula ... +connector ). Best,

Doc

[BillyRay123]

hi is that the lockable sat nav when I fitted mine with the lockable bit on it
was marking the screen when you altered the screen height

Yes that's the one, tom tom 450 premium pack, it will be hard to use the lock but if you push the screen forward like your adjusting it, I can just turn the key without scratching it... it is very close to the screen though

[BillyRay123]

Went out & tried male spade connectors to ACC1 & ACC2 electical connections under the rear seat. The standard red or blue spad electical male connector works. Found this set on Amazon with the spad electical male connector ( https://www.amazon.com/Accessbuy-Insula ... +connector ). Best,

Doc

Good to hear mate

[BillyRay123]

Couple of pics...

Looks great, on my to do list. I tried a zip up bar mount for my phone, but it overheats and shuts down. My bike is mostly commuting though, so it's hard to justify the $

Sent from my SM-T800 using Tapatalk

Cheers pal

[TUBSY]

hi is that the lockable sat nav when I fitted mine with the lockable bit on it
was marking the screen when you altered the screen height

Yes that's the one, tom tom 450 premium pack, it will be hard to use the lock but if you push the screen forward like your adjusting it, I can just turn the key without scratching it... it is very close to the screen though

thanx will have to try mine again took the lock off because it was touching screen