Any reliable SD-GT's out there?

jfwaller
125cc
125cc
Posts: 10
Joined: Sat May 06, 2017 6:04 pm
Country: USA
City: Corte Madera
Year: 2017

Re: Any reliable SD-GT's out there?

Post by jfwaller » Tue May 16, 2017 8:41 am

Went for a ride around west Marin today, had the MTC fault out again. The check engine light stayed on—again—although I was able to reset the MTC and return home without a repeat. This suggests to me that the exhaust valve is once again the culprit. I've armed myself with your observations on previous posts here, and will return to the dealer to see what they can do. Last time (last week) they plugged into the ECU to identify and then reset the error code, which they identified as coming from the exhaust valve. I've watched the exhaust valve to verify that it is moving when the ignition is switched on. Problem is, the fault has always occurred during a ride, out of nowhere, never on initial startup.

I've had this bike just over a week, and wasn't planning a link pipe install, or exhaust valve removal, right away. I'm wondering if the kind of bypass that DaveNZ describes can be done with the stock exhaust and cat intact. Any ideas?

DaveNZ
900cc
900cc
Posts: 418
Joined: Thu Oct 13, 2016 10:20 pm
Country: New Zealand
City: New plymouth
Year: 2016

Re: Any reliable SD-GT's out there?

Post by DaveNZ » Tue May 16, 2017 10:07 am

JF, i got a link pipe from Remus, and it came with a cam that replaces the valve cables, and the valve cable cam, at a later date you could get the Remus link pipe and a muffler to suit, but for now and under warrantee, get the bike shop to sort it, it could be a sticking exhaust valve, or the electric mechanism that turns the cam opening and closing the valve. Let them sort it, the do your add ons when you need them. my 2cents anyway.
2016 1290GT-remus link and muffler, 2010 Black 1200 Multistrada full Termi system with mapping, 2005 SMR 640, full Titanium system, Mikuni flatside racing carb, 2 sets of wheels, 18 litre tank, and a nice soft seat.

jfwaller
125cc
125cc
Posts: 10
Joined: Sat May 06, 2017 6:04 pm
Country: USA
City: Corte Madera
Year: 2017

Re: Any reliable SD-GT's out there?

Post by jfwaller » Tue May 16, 2017 7:26 pm

Thanks, Dave. I'll take it in this afternoon or tomorrow and see what they can do. I've copied the relevant parts of these posts on my phone, maybe they'll provide the service guys with some guidance.

AllanP
Supporter
Supporter
Posts: 144
Joined: Wed Feb 22, 2017 1:18 am
Country: USA
City: Austin
Year: 2010

Re: Any reliable SD-GT's out there?

Post by AllanP » Wed May 17, 2017 3:51 am

jfwaller wrote:Thanks, Dave. I'll take it in this afternoon or tomorrow and see what they can do. I've copied the relevant parts of these posts on my phone, maybe they'll provide the service guys with some guidance.
I hope they get it sorted out for you.

Be careful riding the bike until you get the MTC problem fixed because when the MTC fails the bike is designed to go into what my dealer calls "limp mode" and only allow limited power to the back wheel. This by itself would not be a disaster but my bike had an intermittent MTC failure and before it failed completely and would cut ALL power momentarily before going into limp mode each time it happened. If this occurred right on the apex of a corner it could significantly throw you off line which might not be good.

steved57
Supporter
Supporter
Posts: 67
Joined: Mon Jul 29, 2013 8:56 pm
Country: USA
City: East Texas
Year: 2010
Colour: Silver
Location: Texas

Re: Any reliable SD-GT's out there?

Post by steved57 » Thu May 25, 2017 7:40 pm

Okay just did a 1,400 mile ride so now have 2,200 miles on her and so far no issues whatsoever !! :P
2010 KTM RC8
2015 KTM 690 Enduro
2017 KTM 250 XCF
2015 KTM 200 XCW
2003 Yamaha TZ 250
2017 KTM 1290 Super Duke GT
1074 Suzuki TS 500 Titan
2008 MV Agusta F4 1000 312R

Aussie Dave
900cc
900cc
Posts: 436
Joined: Sat Mar 04, 2017 7:30 am
Country: Australia
City: Brisbane
Year: 2017

Re: Any reliable SD-GT's out there?

Post by Aussie Dave » Fri May 26, 2017 8:46 am

Not had any problem (only 6,000kms :roll: ) but, was wondering......on the Caponord1200 forum everyone was talking about a Healtech exhaust valve elimunator plug-in device. Not seen any mention in this forum. If such a device was made for the 1290, might remove a potential weak spot.

My exhaust valve motor controller eventually failed on that Capo1200 and was replaced under warranty at 30,000kms, but the thing was still easily ride-able with the exhaust valve stuck fully open...... sounded great too (not too loud - just more menacing). I wonder if the 1290 would work as well with the electronics tricked into thinking the exhaust valve was still working, after being disconnected?
Current delights...1290GT-2017, CBR1100XX-2005

Prev loves...Capo1200TP-014, CBR11xx-002, 2xFZR1000genisis-94, FJ1200-89, FJ1100-84, XS1100P, VF1000F-83, CX500, VF750S, KZ1000J1-81, KZ1000ST-79, CB750F2-77, CB360T-74, CB175.. started it all in 1974 ;)

DaveNZ
900cc
900cc
Posts: 418
Joined: Thu Oct 13, 2016 10:20 pm
Country: New Zealand
City: New plymouth
Year: 2016

Re: Any reliable SD-GT's out there?

Post by DaveNZ » Fri May 26, 2017 10:13 pm

Thats what many of us are waiting for Dave, an electronic plug in solution, so the entire valve- cables an motor can be removed. my valve and cables have gone, but the motor (actuator i think its called) is still operational, but it has a sneaky little cam inside that fools the ECU into thinking the valve is still there and working as it should. A valve in an exhaust after time must get stiffer and eventually fail, putting strain on the actuator motor. I'm hoping with my sneaky cam, and no valve, the actuator motor gets an easy life, and lasts much longer. long enough for an electronic dongle to come out to replace the whole stupid system.
2016 1290GT-remus link and muffler, 2010 Black 1200 Multistrada full Termi system with mapping, 2005 SMR 640, full Titanium system, Mikuni flatside racing carb, 2 sets of wheels, 18 litre tank, and a nice soft seat.

J biker
Supporter
Supporter
Posts: 82
Joined: Fri Mar 03, 2017 6:41 pm
Country: UK
City: Durham
Year: 2017

Re: Any reliable SD-GT's out there?

Post by J biker » Sun Jun 04, 2017 10:57 pm

Just hit 3000miles this weekend, problem free happy miles;)

Unlike my mates new Multistrada....had to cancel meeting up with us, big pool of oil next to his bike that should have been inside the fork leg!

supermotoD
125cc
125cc
Posts: 36
Joined: Thu Apr 24, 2014 8:16 am
Country: us
City: brentwood
Year: 2014
Colour: White
Model: SMT

Re: Any reliable SD-GT's out there?

Post by supermotoD » Wed Apr 04, 2018 9:09 am

Any problems updates?

Aussie Dave
900cc
900cc
Posts: 436
Joined: Sat Mar 04, 2017 7:30 am
Country: Australia
City: Brisbane
Year: 2017

Re: Any reliable SD-GT's out there?

Post by Aussie Dave » Sat Apr 07, 2018 7:29 am

YeeeHarrrrrrr......... errr, ahem, yes - my GT is still 100%.......but I must admit to being the unreliable component :lol:

I've just had open heart surgery to by-pass some narrowed arteries...... that's a whole story in itself ;)

So I have to be happy just looking at my GT as I shuffle about recovering at home (now) and waiting for my chest bones to knit (not permitted to drive car either for 2 months or so).

At least I found the problem (my arteries) and didn't suffer a heart attack while riding the GT. 11,290kms on the clock last time I looked......... and in a hurry to put a heap more on it as soon as I'm welded together enough to withstand the vigour's of gentlemanly motorbicycle touring ;) on a 150hp weapon :lol:
Last edited by Aussie Dave on Mon Apr 09, 2018 10:58 am, edited 1 time in total.
Current delights...1290GT-2017, CBR1100XX-2005

Prev loves...Capo1200TP-014, CBR11xx-002, 2xFZR1000genisis-94, FJ1200-89, FJ1100-84, XS1100P, VF1000F-83, CX500, VF750S, KZ1000J1-81, KZ1000ST-79, CB750F2-77, CB360T-74, CB175.. started it all in 1974 ;)

jjscsix
500cc
500cc
Posts: 97
Joined: Mon Jan 01, 2018 4:41 pm
Country: USA
City: Houston
Year: 2017
Colour: Silver

Re: Any reliable SD-GT's out there?

Post by jjscsix » Sat Apr 07, 2018 1:37 pm

Aussie Dave wrote:
Sat Apr 07, 2018 7:29 am
YeeeHarrrrrrr......... errr, ahem, yes - my GT is still 100%.......but I must admit to being the unreliable component :lol:

I've just had open heart surgery to by-pass some narrowed arteries...... that's a whole story in itself ;)

So I have to be happy just looking at my GT as I shuffle about recovering at home (now) and waiting for my chest bones to knit (not permitted to drive car either for 2 moths or so).

At least I found the problem (my arteries) and didn't suffer a heart attack while riding the GT. 11,290kms on the clock last time I looked......... and in a hurry to put a heap more on it as soon as I'm welded together enough to withstand the vigour's of gentlemanly motorbicycle touring ;) on a 150hp weapon :lol:
Glad to hear they caught the problem before....well, before it got worse! Best of luck on your recovery.
2017 KTM Superduke GT, BMW 1600 GT, Ducati 1199 Panigale

DaveW
Supporter
Supporter
Posts: 38
Joined: Tue Jan 16, 2018 4:30 am
Country: New Zealand
City: Woodend
Year: 2017
Colour: Silver

Re: Any reliable SD-GT's out there?

Post by DaveW » Sun Apr 08, 2018 8:59 am

Aussie Dave.
You will be back on the GT before you now it.....
All the best m8

🍻DaveW
2006 supermotard 950 , 2008 superduke 990, 2016 1290GT

Aussie Dave
900cc
900cc
Posts: 436
Joined: Sat Mar 04, 2017 7:30 am
Country: Australia
City: Brisbane
Year: 2017

Re: Any reliable SD-GT's out there?

Post by Aussie Dave » Mon Apr 09, 2018 11:00 am

Cheers buddy........ I hope so......... going really well now.......... just got to remember to throttle off and not do anything stupid before I heal enough to go out for a spin...... :)
Current delights...1290GT-2017, CBR1100XX-2005

Prev loves...Capo1200TP-014, CBR11xx-002, 2xFZR1000genisis-94, FJ1200-89, FJ1100-84, XS1100P, VF1000F-83, CX500, VF750S, KZ1000J1-81, KZ1000ST-79, CB750F2-77, CB360T-74, CB175.. started it all in 1974 ;)

mick shere
Supporter
Supporter
Posts: 155
Joined: Mon Jul 10, 2017 6:48 am
Country: UK
City: Plymouth
Year: 2017

Re: Any reliable SD-GT's out there?

Post by mick shere » Mon Apr 09, 2018 6:47 pm

All the very best mate, heal soon 8-)

Post Reply