Accessories

[knackers]

The BST carbon wheels have landed and OMG!!! Now to obtain all the Ti bolts for the rear disc & sprocket.

[SUPERDUKEINOZ]

Mmmmmm nice!
What sort of dollars did they cost Knackers?

I wish they were available in a different spoke design, not that it really matters how they look its all about the weight reduction but a spoke design more suited to the 1290 would be sweet

Let us know how the 1290 feels with them fitted?

[knackers]

Mmmmmm nice!
What sort of dollars did they cost Knackers?

I wish they were available in a different spoke design, not that it really matters how they look its all about the weight reduction but a spoke design more suited to the 1290 would be sweet

Let us know how the 1290 feels with them fitted?

I got these for a special price of $4315.00 delivered and they would probably cost around $5500 to import them here when you add the GST & import tax. The design of the spokes are fine to me and with the single sided swinger you have to maximise the strength so it would be hard to have the fancy pants small spoke design of the std wheels which I like too. If you pick these up and seen them live the first word you would say starts with F. lol I did.

[HDKAWKTM]

Knackers. Those wheels are beautiful. Post a pic or two once on your bike.

[knackers]

Knackers. Those wheels are beautiful. Post a pic or two once on your bike.

Just ordering some Ti nuts and bolts and then will fit them.

[Mgt_289]

IMG_5286.JPG

I bought some decals on ebay and done my existing helmet.

IMG_5286.JPG

Hi mate - did you air brush these KTM Decals on?
They look very nice and 'factory'
Super impressive


Sent from my iPhone using Tapatalk

[knackers]

Carbon wheels fitted and tissue box empty. lol. Also fitted new chain & sprockets (16 tooth front ) fitted. Rear sprocket fitted with Ti bolts and also rear subframe bolts replaced with Ti bolts.

[Tancakar]

fair to say that's the best ever upgrade however i don't think KTM Superduke 1290 r or GT suffers from changing directions quickly to spend that kind of money on wheels. But looks amazing.

[knackers]

fair to say that's the best ever upgrade however i don't think KTM Superduke 1290 r or GT suffers from changing directions quickly to spend that kind of money on wheels. But looks amazing.

Just the sex value then. lol
More to than just the handling my friend.

[MR C]

They look better on a GT [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]

[knackers]

They look better on a GT [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]

Nice mobility scooter. lol

[knackers]

[dukebadboy]

Does anyone know some Titanium after market flange nuts?

I did fine Sproket nuts from RacePro on eBay, but can't find anything similar for flange.

[MR C]

Does anyone know some Titanium after market flange nuts?

I did fine Sproket nuts from RacePro on eBay, but can't find anything similar for flange.

I've done both in titanium, mine are from pro-bolt, they don't list them so you have to ask for the specific nuts .

[dukebadboy]

Thank you!

[dukebadboy]

Does anyone know some Titanium after market flange nuts?

I did fine Sproket nuts from RacePro on eBay, but can't find anything similar for flange.

I've done both in titanium, mine are from pro-bolt, they don't list them so you have to ask for the specific nuts .
[img]https://uploads.tapatalk-cdn.com/20170424/3690c94af8cbd33391ff1a33a4929f22.jpg[/img]

So I contacted pro-bolt and asked them what's the price for Flange nuts, but Vicky, from their sales team, couldn't find it. She was very sure they don't sell nuts for Flange.


Do you by any chance remember a product code? Or do I just ask for nuts of specific size?

[MR C]

I asked for the specific size, I had removed my nuts and had taken them with me when I went to the nec bike show. I think there M12 if I recall with standard pitch thread, the guy on the PB stand even came over to the Ktm stand to see where the nuts came from.

I also replaced all the fairing and plastic panel fasteners, they don't or did not at the time list for the GT, so yet again I asked for the specific size and spec.

They deffo PB I have all my stuff from them and have a few spares, I always order a couple of extras.

[SUPERDUKEINOZ]

[/quote]
So I contacted pro-bolt and asked them what's the price for Flange nuts, but Vicky, from their sales team, couldn't find it. She was very sure they don't sell nuts for Flange.


Do you by any chance remember a product code? Or do I just ask for nuts of specific size?[/quote]

You are looking to buy flange nuts, just a nut with extra surface area where it seats, simple, not nuts to suit a flange

You need M10 for the sprocket carrier & M8 for the actual sprocket

23 & 26>

http://www.ktmonlineparts.com.au/partFi ... #component

[SUPERDUKEINOZ]

So I contacted pro-bolt and asked them what's the price for Flange nuts, but Vicky, from their sales team, couldn't find it. She was very sure they don't sell nuts for Flange.


Do you by any chance remember a product code? Or do I just ask for nuts of specific size?

You need flange nuts, not nuts to suit a flange, simply asking for the wrong thing

The sprocket carrier is M10 x 1.25 & the sprocket nuts are M8 x 1.25

The answer is usually very easy to find....google & parts diagrams

23 & 26>

http://www.ktmonlineparts.com.au/partFi ... #component

[SUPERDUKEINOZ]

Search button at Pro-Bolt>

https://www.pro-bolt.com/search/?q=m10+ ... tanium+x+6

https://www.pro-bolt.com/search/?q=m8+f ... tanium+x+6

2 minutes to work all that out if you look around!