Akra full exhaust servo question

Post Reply
JackRabbitSlim
125cc
125cc
Posts: 20
Joined: Wed May 04, 2016 3:14 am
Country: Us
City: Rogers
Year: 2010
Colour: Black

Akra full exhaust servo question

Post by JackRabbitSlim » Fri Nov 24, 2017 4:02 pm

I am sure this has been posted but couldn’t find . I just pulled the trigger on the 017 sdr blk. Sold the 015 ....movin on up ! I just order ed the Akra full system and was wondering about removing the servo/ butterfly.Will the ktm Akra come with a map or do I need to buy a servo blocker ? I want to remove the entire servo thanks


Sent from my iPad using Tapatalk

Rusty Shackleford
125cc
125cc
Posts: 8
Joined: Wed Jun 21, 2017 4:07 am
Country: Canada
City: Northland
Year: 2010
Colour: White

Re: Akra full exhaust servo question

Post by Rusty Shackleford » Sat Nov 25, 2017 7:17 am

The Akra map deletes the servo, the map needs to be loaded by the dealer via the ktm scantool but doesn't have a cost associated with it so you should only have to pay the labor charge to get it. After that you can simply unplug/remove the servo and route the wires on the bike up and away. No need for the blocker.

Striff
125cc
125cc
Posts: 35
Joined: Thu Oct 19, 2017 12:20 am
Country: Australia
City: Brisbane
Year: 2017

Re: Akra full exhaust servo question

Post by Striff » Sat Nov 25, 2017 7:47 pm

One thing I learnt, as I fitted the exhaust myself, is the positioning of the sensor for the exhaust won't allow for the servo, it has to be removed, no option.

I had the blocker in the service as I had another aftermarket exhaust before going to the Akra.
They give you a plug for the connector, but without the map I was getting MTC errors, and would not let me accelerate hard.

I ended up zip tying my servo on the left side of the bike and reconnecting it until the dealer loaded the Akra map later that week.


Sent from my SM-G950F using Tapatalk


JackRabbitSlim
125cc
125cc
Posts: 20
Joined: Wed May 04, 2016 3:14 am
Country: Us
City: Rogers
Year: 2010
Colour: Black

Re: Akra full exhaust servo question

Post by JackRabbitSlim » Sun Nov 26, 2017 12:14 pm

Thanks all very helpful. Answers my question - all I need to do is install full Akra remove servo and dealer will load map that will clear the error code . Perfect thanks again. Can’t wait to get full exhaust and rot airbox installed


Sent from my iPad using Tapatalk

Striff
125cc
125cc
Posts: 35
Joined: Thu Oct 19, 2017 12:20 am
Country: Australia
City: Brisbane
Year: 2017

Re: Akra full exhaust servo question

Post by Striff » Sun Nov 26, 2017 12:47 pm

No Probs,
I just did a posting of what you get if interested

http://www.ktmsmt.com/viewtopic.php?f=3 ... 402#p62402

michaelnel
Supporter
Supporter
Posts: 47
Joined: Sun Jul 16, 2017 1:32 pm
Country: USA
City: Angels Camp, CA
Year: 2016
Colour: Black & Orange

Re: Akra full exhaust servo question

Post by michaelnel » Sun Nov 26, 2017 1:42 pm

I bought my full Akrapovic system from Rottweiler. It came without the K&N filter and SAS blockoff plates at a reduced cost. I had already done the SAS removal and I don't like K&N filters (I installed the Rottweiler airbox with 100/80 stacks).

Just so you know that if you don't need that stuff you can buy it without.

paul65
Supporter
Supporter
Posts: 36
Joined: Thu Jun 22, 2017 8:15 pm
Country: United Kingdom
City: leeds
Year: 2017

Re: Akra full exhaust servo question

Post by paul65 » Tue Nov 28, 2017 9:56 am

iam going to have the full akra system fitted to my 17
but my question is does the rotti intake invalidate the warranty

Post Reply