Reset service indicator 2014 to 2016 models

Still the most important introductory info..
User avatar
kevxtx
Moderator
Moderator
Posts: 4737
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Reset service indicator 2014 to 2016 models

Post by kevxtx » Mon Mar 31, 2014 8:58 am

The next service due is shown on the dash for a few seconds when you first turn on the key.

To reset the km or months until next service.

- hold the up and down buttons and turn on the ignition
- continue to hold the up and down buttons until the display cycles through all the menus
- continue to hold the up and down buttons when the setting menu is reached
- let go the buttons & push both of them again & hold
- after a few seconds the settings menu will change to allow you to choose the kms and months until next service
- You can now let go of the up and down buttons
- If you end up on the MTC/ABS screen you have gone to far start over again
- Use the "set" button to increase the numbers. Keep going and the kms and months will cycle back around to 0 if you go past your choice.

I will do a clearer video soon: http://www.youtube.com/watch?v=CU2R-VvX ... e=youtu.be
http://youtu.be/CU2R-VvXJZ4

dflowers
900cc
900cc
Posts: 356
Joined: Sun Oct 23, 2011 3:08 am
Country: USA
City: Seattle
Year: 2010
Colour: White

Re: Reset service indicator

Post by dflowers » Thu May 22, 2014 12:45 am

Thank you for posting this useful information!

I was riding my 1290 down the highway today when a warning/service message started flashing. Every time I would turn on the ignition I would get the flashing service message and the little triangle with the exclamation point in the matrix display. The bike now has 366 miles. First service is supposed to be around 600 miles. I think the first service was set to 500 KM which equals about 310 miles which is probably when the service message kicked in. So using your instructions I set the service to 1000 KM and all the warnings went away and all is back to normal!

User avatar
kevxtx
Moderator
Moderator
Posts: 4737
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Reset service indicator

Post by kevxtx » Thu May 22, 2014 1:05 am

Good work.

crabman
125cc
125cc
Posts: 25
Joined: Wed May 21, 2014 1:15 pm
Country: USA
City: Orange City, FL
Year: 2014
Colour: Black & Orange

Re: Reset service indicator

Post by crabman » Thu May 22, 2014 2:40 am

That's exactly what happened to mine. Since the service interval is in KM I bet the USA service techs are just seeing "500" and assuming its miles.

oldtlsdoug
125cc
125cc
Posts: 5
Joined: Tue Jun 24, 2014 12:29 pm
Country: USA
City: Glen Rose, TX
Year: 2014
Colour: Black

Re: Reset service indicator

Post by oldtlsdoug » Mon Jul 07, 2014 2:29 am

Great information, fellas, just reset mine to 15k. Thanks!

Juan
125cc
125cc
Posts: 13
Joined: Tue Jul 15, 2014 11:46 pm
Country: usa
City: NC
Year: 2014
Colour: Black & Orange

Re: Reset service indicator

Post by Juan » Tue Jul 15, 2014 11:59 pm

Thank you for that!
My dealer had my second service at 5k miles even though the book clearly reads 9,300k miles... ...I wonder if it has any thing to do with the fact that I negotiated the first two service for free as part of the agreement and so they wanted to get that out of the way ASAP :?:

Uplander
50cc
50cc
Posts: 2
Joined: Tue Jul 22, 2014 10:00 pm
Country: US
City: Seattle
Year: 2014

Re: Reset service indicator

Post by Uplander » Tue Jul 22, 2014 10:09 pm

Thanks for the instructions!

Mine was also set to 500km. I just reset it again to 500 so I don't forget to do the first oil change at 621 miles.

Akalnoky
250cc
250cc
Posts: 70
Joined: Fri Jul 11, 2014 1:31 am
Country: Australia
City: Pomona
Year: 2014
Colour: Black
Location: Pomona, Queensland

Re: Reset service indicator

Post by Akalnoky » Mon Sep 08, 2014 2:13 am

Thanks Kev, the Dealer had set to 7,500k. When I rang him to ask if I could reset it they told me it can only be done there. The indicator came on at 8,500.

User avatar
kevxtx
Moderator
Moderator
Posts: 4737
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Reset service indicator

Post by kevxtx » Mon Sep 08, 2014 9:27 am

There are always ways to find hidden doors. :D

Akalnoky
250cc
250cc
Posts: 70
Joined: Fri Jul 11, 2014 1:31 am
Country: Australia
City: Pomona
Year: 2014
Colour: Black
Location: Pomona, Queensland

Re: Reset service indicator

Post by Akalnoky » Mon Sep 08, 2014 10:01 am

Mate, have done 10,500ks so far. All good with rear wheel bearing and shock installed right. Have had niggling warranty issues with Indian made indicators. So far Rear Right x 2 and Rear Left x 1. Had the Speedo Bracket recall done but on a trip to Dorrigo this weekend it broke again. I think the tachometer will need a replacement at some stage as it gets condensation if left with the sun on it.

Changed the front sprocket after 2,000k with a Sunstar, K&N filter, tank protection sticker kit, panniers, pillion seat bag, heated grips, front disc lock and tail tidy all from KTM parts express from the US. Also got the workshop CD from them as well.

Cheers, Alex.

downunder
Supporter
Supporter
Posts: 382
Joined: Sun Apr 21, 2013 11:23 am
Country: Australia
City: Mount Gambier
Year: 2014

Re: Reset service indicator

Post by downunder » Mon Sep 08, 2014 10:35 am

Akalnoky, due to my location I'm tossing up whether to have an instrument bracket posted to me or wait 8 months and have it done next service (or next warranty trip :roll: ).
What is the failure I need to look out for in the mean time?
Gone but not forgotten: '74 Honda XL100, '75 Suzi TS100, '76 Suzi T500, '78 Yam XT500, '80 Suzi GSX1100ET, '81 Suzi GSX100EX, '84 Honda VF1000R, '99 Honda CBR900RR, '10 KTM 990SMT

User avatar
kevxtx
Moderator
Moderator
Posts: 4737
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Reset service indicator

Post by kevxtx » Mon Sep 08, 2014 10:36 am

Same as me leaky indicators. :evil:

Tunafish
125cc
125cc
Posts: 19
Joined: Wed Jan 21, 2015 8:09 pm
Country: United States
City: Spokane
Year: 2014

Re: Reset service indicator

Post by Tunafish » Wed Feb 11, 2015 6:38 pm

I disconnected my battery and now I have to reset the clock - I am not totally incapable but have been too lazy to
read the owners manual on the reset - anyone have a reasonable quick explanation as to how to reset clock?

I tried doing intuitively but no luck - geesh its too complicated for this 75 year old enthusiast

Thanks

Steve

Akalnoky
250cc
250cc
Posts: 70
Joined: Fri Jul 11, 2014 1:31 am
Country: Australia
City: Pomona
Year: 2014
Colour: Black
Location: Pomona, Queensland

Re: Reset service indicator

Post by Akalnoky » Thu Feb 12, 2015 8:37 am

Mate - it vibrates on bad roads if broken, probably wouldn't help the instruments life! Cheers

bodypilot
675cc
675cc
Posts: 187
Joined: Wed Jan 07, 2015 4:01 am
Country: USA
City: Irvine, CA
Year: 2014
Colour: Black
Location: Southern California

Re: Reset service indicator

Post by bodypilot » Mon Aug 24, 2015 12:45 am

Tunafish wrote:I am totally lazy.

Steve
There you go I made it more accurate for you. The exact same thing happened to me when working on the electronics and had to disconnect the battery. It wasn't intuitive but the obvious way forward was to follow the instructions in the manual.

http://www.ktm.com/globalassets/product ... bed_en.pdf
Akra Ti system,Ohlins TTX shock,GP Racing cartridges,Rottweiler intake,Dynojet PCV/AutoTune/Ignition/POD300,BST Carbon Rims+Ceramic,Pirelli Supercorsas (200rear),Brembo T-drive Rotors,Vesrah Pads,Brembo RCS17 master,Recluse clutch,RC8 selector, Tyco hoses

Somefun
250cc
250cc
Posts: 68
Joined: Wed Sep 30, 2015 2:23 pm
Country: US
City: Connecticut
Year: 2015

Re: Reset service indicator

Post by Somefun » Mon Oct 19, 2015 11:32 pm

Does the bike have some sort of limited deal until after 600 miles? I thought I heard that somewhere?

dmacl
250cc
250cc
Posts: 44
Joined: Wed Aug 06, 2014 6:58 pm
Country: United Kingdom
City: NE Scotland
Year: 2013
Colour: Black

Re: Reset service indicator

Post by dmacl » Tue Oct 20, 2015 11:32 am

The shift light comes in at 6000rpm (I think) until after 1000km (~600miles), when it will go to whatever RPM is set in the settings screen. Nothing is limited as far as I know.

Somefun
250cc
250cc
Posts: 68
Joined: Wed Sep 30, 2015 2:23 pm
Country: US
City: Connecticut
Year: 2015

Re: Reset service indicator

Post by Somefun » Wed Oct 21, 2015 10:14 am

Cool thank you! Pick up my new baby tomorrow :mrgreen:

exup
250cc
250cc
Posts: 47
Joined: Fri Oct 03, 2014 5:00 am
Country: Australia
City: Sydney
Year: 2014
Contact:

Re: Reset service indicator

Post by exup » Mon Nov 30, 2015 1:05 am

Hi

thanks for the heads up on this, got my mini 100KM service done ok.

Then it had its 1st main service when it was flashing Service alert. Thing is, it was the 12 months limit had reached but only had about 13KM. So they just reset the yearly setting. When it reached 15K it started flashing again!!! Having only done 5 months and 2000KM.

Bit of a cheek. So its now due a proper service at 21000 (4600KM to go or 12 months) after me resetting it.

Ta!

KiT
500cc
500cc
Posts: 106
Joined: Sat Apr 05, 2014 1:26 pm
Country: USA
City: Denver
Year: 2016
Colour: Black

Re: Reset service indicator

Post by KiT » Mon Apr 03, 2017 2:14 pm

This works for the 620mile service correct? I've seen talk of the dealer having to clear just the first one out.

Post Reply