Ram's SMT modification list

Here be mechanigeeks. Anything technical that is not a teething problem.
Post Reply
User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Ram's SMT modification list

Post by Ram » Tue Feb 09, 2016 7:53 pm

Hi guys!

My name is Remi and I'm from Poland. ;)
I'm a happy user (still) of 2011 SMT from about one month.

After a hours of reading of this great forum I've done some mods:
1 - Wings Carbon silencers (already was in smt)
2 - add K&N filter fitted in stock airbox instead of stock paper
3 - add OBD TuneECU cable into my toolbox
4 - SAS removed, added plates, and emulated SAS valve with 21kOhm 0,25W load (and off it via TuneECU)
5 - EPC 2 + 3 gear reductions off via TuneECU
6 - O2 sensors lambda off via TuneECU and removed from exhaust pipes
7 - Second flies removed and turned off via TuneECU (motor and shafts stay there)

Next will be colour change with rubber spray coating (plastidip) on frame (orange) and front lamp covers (white) - now all is in black like the darkness night :)

Image

The question is...

What is your fauvorite colour?

Image

No, just kidding :lol: - which map I suppose to load via TuneECU - because standard Akro maps is not suitable when the second flies are removed - that's what I deduced from yours posts.

Many thanks for any help!

User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Re: Ram's SMT modification list

Post by Ram » Wed Feb 17, 2016 4:36 pm

Anybodyyyyyy? :roll:

I found something like this (mine):

#9/ Kev STD Air Box RC8 FINAL 19.8.12.hex
Standard air box (ok), standard air filter (k&n), snorkel installed (std snorkel).
Can be used with STD or RC8 stacks (std).
2nd flies & shafts removed (with shafts).
Leovince pipes (wings)
O2 sensors turned off (yes sir).
EPC turned off (yes sir)
Rev limiter 9750rpm (can be)
SAS Removed (yes)
Make in Brisbane Australia (poland), sea level (yes, Gdansk City), 22 degrees C (ok), 95 RON BP Fuel (ok), mapped to 13:2.1 using a AT-300 auto tune (nope)

What you think?

User avatar
kevxtx
Moderator
Moderator
Posts: 4735
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Ram's SMT modification list

Post by kevxtx » Thu Feb 18, 2016 10:29 am

There are not many standard air box maps in the map section, I would try a few to see what your bike likes.

There is nothing better than a custom map built for your own bike & would recommend it every time.

User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Re: Ram's SMT modification list

Post by Ram » Fri Feb 19, 2016 9:20 am

Thanks.

Is there any way to build good map without dyno?

User avatar
kevxtx
Moderator
Moderator
Posts: 4735
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Ram's SMT modification list

Post by kevxtx » Fri Feb 19, 2016 9:37 am

I would always recommend a custom Dyno map, the next best tune would be a PCV + Auto Tune, have a read here to see the differences.

Page to the top viewtopic.php?f=29&t=6888&p=42781#p42781

User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Re: Ram's SMT modification list

Post by Ram » Fri Feb 19, 2016 9:37 pm

Thank you for all help.

I will try few maps and if no one will be good enaugh I try on dyno.

User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Re: Ram's SMT modification list

Post by Ram » Thu Mar 03, 2016 12:47 pm

Map #9 downloaded :)

First ride after 15 idle when wheather will be better.

I will try to load map 7, 10 or 20 - after I rebuild stock filter (add extra two K&N square filters 19x13cm and 11x9cm).

Thanks for your support, Kev! :D

In some of maps there is an infos about throttle voltage.
This parameters change automatically while loading tuned maps or I must change it manually?
Do I must change this parameters always when aftermarket, better air flow, filter is installed?

Bike after Plastidip paint job :D

Image

User avatar
kevxtx
Moderator
Moderator
Posts: 4735
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Ram's SMT modification list

Post by kevxtx » Thu Mar 03, 2016 8:02 pm

Your bike looks goog, I like the orange frame.

No real need to change the TPS voltage it is there as a reference, if you want your map to be 100% right you could set your TPS the same as mentioned in the map.

User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Re: Ram's SMT modification list

Post by Ram » Sat Mar 05, 2016 5:10 pm

Thanks. ;)

I try to stay with map #9 after I rebuild airbox (extra two K&N panel filter on top).

More photos from today 15min iddling :D

Image

Image

Image

User avatar
kevxtx
Moderator
Moderator
Posts: 4735
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Ram's SMT modification list

Post by kevxtx » Sun Mar 06, 2016 8:45 am

Looking good.

User avatar
Ram
125cc
125cc
Posts: 8
Joined: Tue Feb 09, 2016 7:19 pm
Country: Poland
City: 3m
Year: 2011
Colour: Black
Model: SMT

Re: Ram's SMT modification list

Post by Ram » Thu Mar 17, 2016 9:20 pm

Add some mods from last time.

H4 COB Led headlight, heated grips, CNC mirrors and two additional K&N filters on the top of stock airbox.

You think that map 9 (stock airbox, snorkel removed) could stay with that type of airbox (additionally filters, snorkel stay in) or better try with maps for DNA filters mods?

Image

Image

User avatar
kevxtx
Moderator
Moderator
Posts: 4735
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Ram's SMT modification list

Post by kevxtx » Fri Mar 18, 2016 8:53 am

Nice work mate.

pk1
675cc
675cc
Posts: 205
Joined: Wed Dec 28, 2011 4:33 pm
Country: uk
City: perth
Year: 2012
Colour: Black

Re: Ram's SMT modification list

Post by pk1 » Fri Mar 18, 2016 5:42 pm

How did you apply the orange coating? I like this :D did you need to remove the frame? As I see the front which is hidden by the tank is still black.
Cheers
Paul

Trottllebody
Supporter
Supporter
Posts: 15
Joined: Sat Nov 19, 2016 10:36 am
Country: Norway
City: Vormsund
Year: 2009
Colour: Silver

Re: Ram's SMT modification list

Post by Trottllebody » Thu Aug 31, 2017 3:07 pm

Hey Ram!
I did the same airboxmod, Wings, o2, SAS , sec.flies off.
What map did you end up with?

Post Reply