Kev's SMR Modification list.

Here be mechanigeeks. Anything technical that is not a teething problem.
Protector
125cc
125cc
Posts: 9
Joined: Tue Nov 05, 2013 2:18 pm
Country: Finland
City: Turku
Year: 2010
Colour: White

Re: Kev's SMR Modification list.

Post by Protector » Sun Nov 24, 2013 1:00 pm

By the way, is there any difference between the SMR "ergo seat" and original SMT seat? Other than the part numbers.

pamioan
250cc
250cc
Posts: 41
Joined: Sat Nov 05, 2011 12:26 pm
Country: cyprus
City: limassol
Year: 2011
Colour: White

Re: Kev's SMR Modification list.

Post by pamioan » Sun Dec 15, 2013 8:44 pm

Anyone knows a source for a good and reasonably priced 42T rear sprocket in Europe?

pamioan
250cc
250cc
Posts: 41
Joined: Sat Nov 05, 2011 12:26 pm
Country: cyprus
City: limassol
Year: 2011
Colour: White

Re: Mods & the effects.

Post by pamioan » Sat Jan 04, 2014 10:34 am

Are these Cats or any other Cats inside the stock pipes of the bike?

There are no emission regulations for motorbikes in my country and I would like to take advantage of this.

My mechanic replaced the stock slip ons with Wings but if there are any kind of cats inside the rest of the exhaust system I want to remove them.

Thanks
Pambos
kevxtx wrote:The Cops are really starting to clamp down on emission controls here in Brisbane & know of two cases where riders have had their number plates & reg plates removed off their bike & they have been sent walking with over a grand in fines & lost points. The last time I was pulled over by the cops was today breathalyze & license check, we soon headed in the other direction for the remainder of the ride.

My answer to the problem is to fit a set of Akrapovic 0648 200 flow cats into my Leovince pipes, I run them with no O2 sensors. My good mate Kev2 machined down the outer diameter of the cats by 0.4mm to make them fit into the Leo Y pipe, Í can run the pipes with or without the cats, it only takes 5 min to remove them. I can't feel any power difference when I run the cats with the baffels in on the Leo's

Copy & Paste the link below for full cat details.

http://www.google.com.au/url?sa=t&rct=j ... 1BOgJzqbXQ

http://www.akrapovic.com/en/Motorcycle/ ... +converter

Image
Image
Image
Image
Image
Image
Image

User avatar
kevxtx
Moderator
Moderator
Posts: 4741
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Kev's SMR Modification list.

Post by kevxtx » Sat Jan 04, 2014 10:53 am

If you removed the standard Cans & fitted Wings there are on there cats in the exhaust system.

pamioan
250cc
250cc
Posts: 41
Joined: Sat Nov 05, 2011 12:26 pm
Country: cyprus
City: limassol
Year: 2011
Colour: White

Re: Kev's SMR Modification list.

Post by pamioan » Sat Jan 04, 2014 10:59 am

kevxtx wrote:If you removed the standard Cans & fitted Wings there are on there cats in the exhaust system.
there are cats in the stock pipes?
As shown in your pictures above?
Can they easily be removed?

Thanks Kev

User avatar
kevxtx
Moderator
Moderator
Posts: 4741
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Kev's SMR Modification list.

Post by kevxtx » Sat Jan 04, 2014 11:22 am

The pictures above are Leovince Y pipe + Akra cats.

If you remove the standard rear cans the cats are in the rear cans.

Nickhk
500cc
500cc
Posts: 105
Joined: Mon Feb 20, 2012 12:49 pm
Country: Hong Kong
City: Hong Kong
Year: 2009

Re: Kev's SMR Modification list.

Post by Nickhk » Tue Jan 14, 2014 1:01 pm

Kev.

I think you've put the KTM hand guards on the new bike? Did you need to drill anything to fit the bar end weights through the outside or do they just fit straight through?

Looking for the hand guards for my SM but I thought you could just fit them over the end of the bar end weights by using the slightly longer KTM screws ...

Cheers!

Nick

User avatar
kevxtx
Moderator
Moderator
Posts: 4741
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: Kev's SMR Modification list.

Post by kevxtx » Tue Jan 14, 2014 8:15 pm

Nick the SMR bar weights fitted straight through the SMT hand guards.

Nickhk
500cc
500cc
Posts: 105
Joined: Mon Feb 20, 2012 12:49 pm
Country: Hong Kong
City: Hong Kong
Year: 2009

Re: Kev's SMR Modification list.

Post by Nickhk » Wed Jan 15, 2014 12:09 am

Thank you, kind sir!

Protector
125cc
125cc
Posts: 9
Joined: Tue Nov 05, 2013 2:18 pm
Country: Finland
City: Turku
Year: 2010
Colour: White

Re: Kev's SMR Modification list.

Post by Protector » Wed Jan 15, 2014 12:52 pm

Any specific place in EU where to order those SMT (or similar) handguards for a good price?

Nickhk
500cc
500cc
Posts: 105
Joined: Mon Feb 20, 2012 12:49 pm
Country: Hong Kong
City: Hong Kong
Year: 2009

Re: Kev's SMR Modification list.

Post by Nickhk » Thu Jan 16, 2014 11:33 am

... just ordered a set from http://www.jimaimracing.co.uk, my preferred choice. Always been excellent.

Part number is 6200207904430 HAND GUARDS CPL.L/S+R/S BLACK

Nick

Protector
125cc
125cc
Posts: 9
Joined: Tue Nov 05, 2013 2:18 pm
Country: Finland
City: Turku
Year: 2010
Colour: White

Re: Kev's SMR Modification list.

Post by Protector » Thu Jan 16, 2014 12:05 pm

Nickhk wrote:... just ordered a set from http://www.jimaimracing.co.uk, my preferred choice. Always been excellent.

Part number is 6200207904430 HAND GUARDS CPL.L/S+R/S BLACK

Nick
Thanks mate. Much appreciated.

Protector
125cc
125cc
Posts: 9
Joined: Tue Nov 05, 2013 2:18 pm
Country: Finland
City: Turku
Year: 2010
Colour: White

Re: Kev's SMR Modification list.

Post by Protector » Fri Jan 17, 2014 10:53 am

Anyone fitted the Acerbis Rally III handguards on 990 SMR/T?

Craig-SM
500cc
500cc
Posts: 110
Joined: Fri Jul 26, 2013 9:07 pm
Country: England
City: Leeds
Year: 2008

Re: Kev's SMR Modification list.

Post by Craig-SM » Fri Jan 17, 2014 4:01 pm

They don't fit due to the brake lever. I bought Acerbis Supermoto like these. http://www.rpamx.co.uk/motocross-enduro ... handguards

Wrath
250cc
250cc
Posts: 76
Joined: Thu Jan 16, 2014 4:18 pm
Country: Sweden
City: Umea
Year: 2011
Colour: White
Model: SMT

Re: Kev's SMR Modification list.

Post by Wrath » Sun Jan 19, 2014 2:12 pm

I bought a white/black KTM guard that fitted ! :)

http://en.ktmsqualonline.com/protege-ma ... -main.html

7800207910030

Really nice :)

Protector
125cc
125cc
Posts: 9
Joined: Tue Nov 05, 2013 2:18 pm
Country: Finland
City: Turku
Year: 2010
Colour: White

Re: Kev's SMR Modification list.

Post by Protector » Sun Jan 19, 2014 3:02 pm

Wrath wrote:I bought a white/black KTM guard that fitted ! :)

http://en.ktmsqualonline.com/protege-ma ... -main.html

7800207910030

Really nice :)
Atleast the price is good on those. Any chance you could post a picture of your bike if you have them installed? :)

Wrath
250cc
250cc
Posts: 76
Joined: Thu Jan 16, 2014 4:18 pm
Country: Sweden
City: Umea
Year: 2011
Colour: White
Model: SMT

Re: Kev's SMR Modification list.

Post by Wrath » Sun Jan 19, 2014 3:16 pm

Sure can, just gonna upload it to photobucket... stay tuned...

Image

Image

Protector
125cc
125cc
Posts: 9
Joined: Tue Nov 05, 2013 2:18 pm
Country: Finland
City: Turku
Year: 2010
Colour: White

Re: Kev's SMR Modification list.

Post by Protector » Sun Jan 19, 2014 5:02 pm

I thank you, kind Sir. They look really nice. Any issues fitting them on or just plug&play? Might get myself a pair too..

Wrath
250cc
250cc
Posts: 76
Joined: Thu Jan 16, 2014 4:18 pm
Country: Sweden
City: Umea
Year: 2011
Colour: White
Model: SMT

Re: Kev's SMR Modification list.

Post by Wrath » Sun Jan 19, 2014 5:26 pm

No problem, they are plug and play but a little tight with wires and such, and also you cannot mount the clamp totally flushed If I can remember but nothing that´s bother me and I´m kind of a pedantic one ;)
Just took the mirrors of after I snapped those picture and installed round small ones that's under the handlebar, looks real nice and they are better then the oem as they are still with no vibration. You looked under your armpit or how I should explain... don´t have any picture of that I'm afraid.

adamgrapher
125cc
125cc
Posts: 5
Joined: Thu Jan 30, 2014 8:21 am
Country: Malaysia
City: KL
Year: 2012

Re: Kev's SMR Modification list.

Post by adamgrapher » Thu Jan 30, 2014 8:35 am

Great and wicked stuff that you had shared Kev!!!!! thumps up!!!! :o

Post Reply