Kev's SMT modification list

[kevxtx]

Kev do you still have the dimensions for fuel pump orings? Seen lots of conflicting measurements.
Do I need to replace if pulling fuel pump, to swap tanks?

Sorry I don't, you will be fine swapping over the pumps.

[jmh]

Yeah thanks. I swapped the pump over, took it out slowly and then used an x pattern on the bolts to pull it into place on the new tank. Put some motor oil on there.

Pump and filters looked sweet, o rings were in good shape.

FYI I belive that is 65mmx3.5mm and 60mmx3mm. The smaller one being the one that can get damaged.

[kevxtx]

George a forum member here still sells bit for the 990's: http://www.ebay.com/sch/gefrago/m.html? ... 7675.l2562

[Christof]

I read your topic and like the modification off the wave brakes.
But I don't see the brakes anymore on later pics?
Some reason for?

[kevxtx]

The China rotors never lasted long they developed a brake shudder so I removed them, the lesson learnt buy good brand name brake rotors.

[sabestian]

Kev. Thank you.

[Verevkin]

Kev Tnx.

[kevxtx]

Not a problem.

[SMT81]

For 320 mm rotors brake, there is a dealer near my home who sells this:
https://avdb-moto.fr/shop/en/front-brak ... aire_-pair