990 Power Commander 5 & Tune ECU custom maps

Here be mechanigeeks. Anything technical that is not a teething problem.
User avatar
kevxtx
Moderator
Moderator
Posts: 4742
Joined: Fri May 27, 2011 11:40 am
Country: Australia
City: Brisbane
Year: 2014

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by kevxtx » Sun May 20, 2018 12:29 am

YannG wrote:
Sat May 19, 2018 10:50 am
kevxtx wrote:
Fri May 18, 2018 10:48 am
990, 1290's & MT09's, my latest a 2018 MT09SP
Hi Kev, I'd actually be interested to see mods and improvements discussed around the mt09 if you run or are part of a similar forum around it? I haven't had the opportunity to try one yet unfortunately.

Dropped the bike at Tuneboy Hornsby today and will get it back next week🖒
The best thing is to join Yamaha MT Owners.... Australia Face book page all my work can be forund there & some of it on the FZ forum: http://www.fz09.org/forum/10-fz-09-buil ... -mods.html


I reflash all my own ECU's & reflash around 100 x MT09s a year, I have done a lot of work in the 8 x different 09 ECUs, you can read about on the FB page.

Tommy
125cc
125cc
Posts: 17
Joined: Sat Apr 01, 2017 3:58 pm
Country: Finland
City: Vasa
Year: 2009
Colour: Black & Orange

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by Tommy » Fri May 25, 2018 7:55 am

jhalfhide wrote:
Sat May 19, 2018 9:14 am

Saved the hex file. Will give it a try at some point. In the U.K.


Sent from my iPhone using Tapatalk
Great! Looking forward to get a review. :)

dikkekletser
50cc
50cc
Posts: 2
Joined: Thu Apr 19, 2018 10:36 am
Country: Belgium
City: Berchem
Year: 2018
Model: Adventure

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by dikkekletser » Wed Jul 25, 2018 9:44 am

I am wondering about the tuneecu maps for the stock bike. Are these optimized maps for a stock bike, or the maps that come stock on the bike?
I'm looking for something to improve engine running generally(if there is something better than the stock map, I just want it running as healthy as possible.) and possibly smoothen the throttle snatchyness a bit. I'm ok with turning off o2 sensors.
edit: It concerns a 2011 model

eagle_awd
Supporter
Supporter
Posts: 62
Joined: Fri May 15, 2015 5:23 am
Country: Canada
City: Windsor
Year: 2011
Colour: White
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by eagle_awd » Wed Jul 25, 2018 1:46 pm

#14 & #15 are for the non-modified bikes, optimized and smoothed maps. #13 if you removed the secondaries.

Start there and see how bike reacts. Always save your stock map to backup first. :)

dikkekletser
50cc
50cc
Posts: 2
Joined: Thu Apr 19, 2018 10:36 am
Country: Belgium
City: Berchem
Year: 2018
Model: Adventure

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by dikkekletser » Wed Jul 25, 2018 2:08 pm

eagle_awd wrote:
Wed Jul 25, 2018 1:46 pm
#14 & #15 are for the non-modified bikes, optimized and smoothed maps. #13 if you removed the secondaries.

Start there and see how bike reacts. Always save your stock map to backup first. :)
Thank you, I will!

User avatar
sabestian
Supporter
Supporter
Posts: 28
Joined: Fri Aug 19, 2016 9:16 am
Country: Poland
City: Warsaw
Year: 2013
Colour: Black
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by sabestian » Thu Oct 04, 2018 8:33 am

Tommy wrote:
Sat May 19, 2018 8:58 am
Hi all,

I didn't get much response when I submitted the post below last summer. I since made one more map which I have been using now for a couple of months without any issues. I have removed the logging equipment and mounted the lambda gauge on the handle bar. Lambda mostly stays around 14,2 when cruising now. At some throttle positions and RPMs it goes as low as 13,5 and as high as 14,8, but you can't really notice when that is happening. For instance I don't get any exhaust pops whatever I do. I remember forum members have had that issue with other maps.

Lambda at bigger throttle openings is still between 12 and 13 so don't worry. :D

Anyhow just out of interest I was wondering if there are any forum members that currently are running Kevs map #20 that would be willing to try my map. Just to see how it runs on other bikes. Preferably in Europe where we have the same fuel. (I don't know how much it varies between north and south Europe)

My latest map can be downloaded here: https://www.dropbox.com/s/upgy27ay8wqz5 ... 7.hex?dl=0
Akra with baffles here, no SAS, no 2nd flies, no O2, MH airbox, short/std stack.
Until now I have been riding and modding all sorts of maps, Kev's #20 feels very good, Tommy's mod7 was almost perfect. I substracted 2% from both tables and it was even better, smoother. It may be needed because of fuel differences, or perhaps restricting baffles?
I hestitated for long to try mod8, because of how good the bike behaved on mod7.
But mod8 is the best I have tried till date. I also substracted 2%, lowered the idle and turned EPC off as I always do. It is super smooth down until 2k rpm, below nothing with two jugs can be smooth anyway :)
Less popping on deceleration, I can live with that (it may be due to leaking exhaust, need to get to that).
Thanks Tommy and Kev!
2013 SMT Black Akra with Y pipe and baffles, some orange bling, no SAS, no 2nd flies, no EPC, no O2, MH airbox, short/std stack, Tommy's mod8 Kev's #20 map, 16/41, Ergo seat, #19 pin dash hack, crash bungs, LEDs, KGR52, Scottoiler, Pirelli Angel ST

Jaan
50cc
50cc
Posts: 2
Joined: Mon Apr 08, 2019 4:33 am
Country: Estonia
City: Haapsalu
Year: 2011
Colour: Black & Orange
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by Jaan » Wed Apr 10, 2019 7:01 am

Hello guys,

i bought 990 SMR which definitely has a race setup at the moment. the fuel economy isn't best (~100km/tank).
Could you please recommend me some custom maps from the list, which should be okay with my mods and still leaves me a good torque response with satisfying fuel economy.

Bike has:
PCV
Akrapovic slip on with no baffles
Rottweiler intake
SAS removed
O2 unplugged and blocked with small cables
I ride with 98E in northen europe (Estonia)

I'm very thankful for any response!
Regards!

User avatar
nrvous
250cc
250cc
Posts: 66
Joined: Tue Mar 29, 2011 2:47 pm
Country: Estonia
City: Tallinn
Year: 2018
Colour: White

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by nrvous » Wed Apr 10, 2019 12:13 pm

Jaan wrote:
Wed Apr 10, 2019 7:01 am
Hello guys,

i bought 990 SMR which definitely has a race setup at the moment. the fuel economy isn't best (~100km/tank).
Could you please recommend me some custom maps from the list, which should be okay with my mods and still leaves me a good torque response with satisfying fuel economy.

Bike has:
PCV
Akrapovic slip on with no baffles
Rottweiler intake
SAS removed
O2 unplugged and blocked with small cables
I ride with 98E in northen europe (Estonia)

I'm very thankful for any response!
Regards!
I can share my previous 2011 SMT PCV map if you're interested:

Akrapovič full exhaust (db-killers out)
SAS removed
O2 removed
EPC disabled
2nd flies/shafts/motor removed
standard airbox completely removed and DNA MK3 with SMT/RC8 stacks installed
F/L switch points set to 50%
rev limiter raised to 10K

Image
Last edited by nrvous on Thu Apr 11, 2019 6:58 am, edited 4 times in total.

Jaan
50cc
50cc
Posts: 2
Joined: Mon Apr 08, 2019 4:33 am
Country: Estonia
City: Haapsalu
Year: 2011
Colour: Black & Orange
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by Jaan » Wed Apr 10, 2019 12:19 pm

For sure mate! Thanks!

User avatar
limeyduffa
900cc
900cc
Posts: 375
Joined: Tue Mar 15, 2011 9:22 am
Country: Australia
City: Adelaide
Year: 2012
Colour: Black
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by limeyduffa » Sat Apr 13, 2019 6:00 am

F* me dead that's drinking Jaan !. You must have 1m flames coming out of your pipes when it backfires and smell like Biggles when you stop at a cafe/pub and people are looking at you because of your RON98 smell ? :lol:

I'm running Kev's #20 map (everything in Nervous's setup accept the power commander and running Quill pipes with the silencers removed). I get 200km per tank before the bingo light comes on. The SMT has an 18L tank, but still you should be getting at least 150km town use.

xaotikos
900cc
900cc
Posts: 417
Joined: Wed Oct 24, 2012 8:11 pm
Country: Greece
City: Athens
Year: 2013
Colour: Black & Orange
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by xaotikos » Sat Apr 13, 2019 4:08 pm

Jaan wrote:Hello guys,

i bought 990 SMR which definitely has a race setup at the moment. the fuel economy isn't best (~100km/tank).
Could you please recommend me some custom maps from the list, which should be okay with my mods and still leaves me a good torque response with satisfying fuel economy.

Bike has:
PCV
Akrapovic slip on with no baffles
Rottweiler intake
SAS removed
O2 unplugged and blocked with small cables
I ride with 98E in northen europe (Estonia)

I'm very thankful for any response!
Regards!
If you have your secondary flies on and you want to try a map without them you should set them to 100% open through tuneecu.

I can also share my custom tuneecu map made on dyno for:
European fuel (greece)
DNA mk3 airbox
Long short stacks
With Secondary flies on
SAS removed
O2 removed and disabled
Leovince with baffles on

Average consumption 7.5lt/100km
Power feels pretty linear on the road.
Engine brake is higher(normal) than with flies removed.

Dyno chart with map #20 before (but with flies on as tuner asked), custom map after.
IMG_0042.jpg
Στάλθηκε από το SM-G950F μου χρησιμοποιώντας Tapatalk



catman78
Supporter
Supporter
Posts: 9
Joined: Thu Apr 06, 2017 12:05 pm
Country: usa
City: ny
Year: 2013
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by catman78 » Sun Apr 14, 2019 11:07 pm

Quick question on Reset Adaptation.
I loaded Map 20 and ran reset afterwards.
Is it normal during 15 minute period for bike to idle high. I was up around 3k for a while.
thanks

User avatar
limeyduffa
900cc
900cc
Posts: 375
Joined: Tue Mar 15, 2011 9:22 am
Country: Australia
City: Adelaide
Year: 2012
Colour: Black
Model: SMT

Re: 990 Power Commander 5 & Tune ECU custom maps

Post by limeyduffa » Mon Apr 15, 2019 12:50 pm

Yeah, mine did that when I removed the SAS.

Post Reply