SMT owners in U.S.
-
tim13smt
- 50cc
- Posts: 2
- Joined: Wed Sep 10, 2014 12:27 am
- Country: U.S.
- City: Pasadena
- Year: 2013
- Colour: Black & Orange
- Model: SMT
Re: SMT owners in U.S.
Greetings,new to the site 2013 SMT, Tim in Pasadena Md.
-
SteveB
- 125cc
- Posts: 14
- Joined: Fri Sep 26, 2014 8:31 pm
- Country: USA
- City: Chattanooga
- Year: 2013
- Colour: Black & Orange
- Model: SMT
Re: SMT owners in U.S.
Greets all - new to the forum, with a new '13 SMT in tow. First time off a sportsbike in years, so we'll see how me and my SMT get along! 
-
kevxtx
- Moderator
- Posts: 4735
- Joined: Fri May 27, 2011 11:40 am
- Country: Australia
- City: Brisbane
- Year: 2014
Re: SMT owners in U.S.
Welcome mate, some light reading for you. viewtopic.php?f=13&t=4946
-
SteveB
- 125cc
- Posts: 14
- Joined: Fri Sep 26, 2014 8:31 pm
- Country: USA
- City: Chattanooga
- Year: 2013
- Colour: Black & Orange
- Model: SMT
Re: SMT owners in U.S.
Thanks - great job on the guide! Don't even have 200 miles on mine yet and am already looking for a way to get the bars lower and further away; nice to know I'm not the only one. SD top triple maybe?
-
Hellboi
- 675cc
- Posts: 298
- Joined: Sun May 19, 2013 1:58 pm
- Country: Japan
- City: Sagamihara
- Year: 2010
- Colour: White
- Location: Midori-Ku
Re: SMT owners in U.S.
Cheapest way is just to roll em forward. I never had the stock bar, Just the Renthal Fatbar, but in the forward most position it is way more comfortable and responsive IMO.SteveB wrote:Thanks - great job on the guide! Don't even have 200 miles on mine yet and am already looking for a way to get the bars lower and further away; nice to know I'm not the only one. SD top triple maybe?
And where might a fellow like me find such a glorious spatula?
-
MotoMike723
- 500cc
- Posts: 91
- Joined: Sat Dec 29, 2012 2:34 am
- Country: USA
- City: Baltimore, MD
- Year: 2012
- Colour: White
Re: SMT owners in U.S.
Welcome Tim. I'm just across the bridge in Dundalk. I have a tune ecu cable when you are ready to add some mods.tim13smt wrote:Greetings,new to the site 2013 SMT, Tim in Pasadena Md.
Mike
2012 SMT White
My mods
Akapovic exhaust - baffles removed
SAS block off plates
2nd flies removed
Rottweiler air box
Throttle tamer
Michelin PR3 front and rear
Short/standard stacks
Running Kev's #20 map.
My mods
Akapovic exhaust - baffles removed
SAS block off plates
2nd flies removed
Rottweiler air box
Throttle tamer
Michelin PR3 front and rear
Short/standard stacks
Running Kev's #20 map.
-
tim13smt
- 50cc
- Posts: 2
- Joined: Wed Sep 10, 2014 12:27 am
- Country: U.S.
- City: Pasadena
- Year: 2013
- Colour: Black & Orange
- Model: SMT
Re: SMT owners in U.S.
Thanks MotoMike723, I will prob take you up on that this winter or sooner. Tim
-
adcolor
- Supporter
- Posts: 367
- Joined: Wed Mar 06, 2013 8:56 pm
- Country: USA
- City: Denver
- Year: 2012
- Colour: White
Re: SMT owners in U.S.
Chattanooga sounds like some great riding country.
Confirm that your riser is in the 'forward' position. If you take a close look, you will see the riser clamps are offset from the top triple tree plate. It can easily be reversed, and should be fairly obvious which direction the offset is.
Confirm that your riser is in the 'forward' position. If you take a close look, you will see the riser clamps are offset from the top triple tree plate. It can easily be reversed, and should be fairly obvious which direction the offset is.
Mods: arrow exhaust, 2nd flies removed, plugged air injection caps, JC30-80 air filter, 44T sprocket, 80w high beam, short levers, weighted bar ends, Rox risers, remapped ecu, heated grips, horn, radiator screen, crash bar, skid plate, backrest.
-
Pops
- Supporter
- Posts: 28
- Joined: Sun Jul 28, 2013 9:37 pm
- Country: USA
- City: Greer
- Year: 2012
- Colour: White
Re: SMT owners in U.S.
How about an SMT rally somewhere in 2015?
-
adcolor
- Supporter
- Posts: 367
- Joined: Wed Mar 06, 2013 8:56 pm
- Country: USA
- City: Denver
- Year: 2012
- Colour: White
Re: SMT owners in U.S.
That sounds fun!
Mods: arrow exhaust, 2nd flies removed, plugged air injection caps, JC30-80 air filter, 44T sprocket, 80w high beam, short levers, weighted bar ends, Rox risers, remapped ecu, heated grips, horn, radiator screen, crash bar, skid plate, backrest.
-
Sweetwater
- 250cc
- Posts: 44
- Joined: Sun Dec 22, 2013 8:37 pm
- Country: USA
- City: Salty City
- Year: 2010
- Colour: Black & Orange
Re: SMT owners in U.S.
Sweetwater wrote:
New owner of a 2010 990 SMT, 6k miles checking in.
I'm located in Salty City, Utardia. Stumbled into this forum when I started looking for oil change instructions. (The best I've seen are here in the tech section from the Aussies, of course). Pretty quiet for an international forum but time to post up and say hello mates. I've been enamored by this bike since I test rode one in Sept. 2010 at the national KTM Rally in Moab, just stumbled upon this bike as a winter time need to sell and could not pass it by.
My handle is Sweetwater County, Wyoming, USA where I had the great pleasure of growing up as a Wild Wyoming Boy, working ranches on the west side of the Wind River Mountains, skiing Jackson Hole, family motel in Bondurant, cliff diving at Flaming Gorge, great memories of sparsely populated geography, back in the day.
I'm baaaaack.....I really like my 1190R but it's wearing some expensive Karoo 3 knobby types and I found myself missing the snap and sizzle of the SMT. Winter is a great time to trade out motos here in the Western USA so........welcome to my world....another 2012 990SMT with 2600 miles....ABS and white....just finished refreshing fluids and some local canyon hooliganisms.....
