Search found 287 matches

by jhalfhide
Sun Sep 09, 2018 10:45 am
Forum: Technical discussions
Topic: Drop in oil pressure during high speed running.
Replies: 57
Views: 5351

Re: Drop in oil pressure during high speed running.

Is it a normal circlip or the kind with the two holes that needs the reverse pliers?

I’d have thought the latter kind would be more than up to the job.


Sent from my iPhone using Tapatalk
by jhalfhide
Fri Sep 07, 2018 11:35 am
Forum: Technical discussions
Topic: 16 Tooth sprocket
Replies: 41
Views: 19439

Re: 16 Tooth sprocket

I'm currently running a 16T but will be changing back to a 17T soon. My only issue with 17T was holding the bike at key UK speed limits. We have 50Mph average speed cameras and 70Mph speed cameras on the motorways. At these speeds the bike seemed to want to sit in between 5th/6th so I tried the 16T....
by jhalfhide
Wed Aug 22, 2018 7:13 pm
Forum: Technical discussions
Topic: Coolant change
Replies: 13
Views: 1264

Re: Coolant change

I wonder if you’d get enough tilt on the centre stand if you whipped the rear wheel out?


Sent from my iPhone using Tapatalk
by jhalfhide
Wed Aug 22, 2018 1:18 pm
Forum: Technical discussions
Topic: Coolant change
Replies: 13
Views: 1264

Re: Coolant change

Ratchet strap through a loop in the garage ceiling.

Have you got a tree with a suitable branch in the garden?


Sent from my iPhone using Tapatalk
by jhalfhide
Sat Aug 18, 2018 1:09 pm
Forum: Technical discussions
Topic: 2010 SMT has been in shop for six weeks!
Replies: 17
Views: 1585

Re: 2010 SMT has been in shop for six weeks!

SuaveDave wrote:Coil swap performed. Coil’s good, error code not. Perhaps something to do with the dongles installed during the SASectomy?
Simply turn off the SAS using TuneECU and do away with the dongles. The SAS shouldn’t case this issue though.


Sent from my iPhone using Tapatalk
by jhalfhide
Fri Aug 17, 2018 9:34 pm
Forum: Technical discussions
Topic: 2010 SMT has been in shop for six weeks!
Replies: 17
Views: 1585

Re: 2010 SMT has been in shop for six weeks!

Simple thing I’m not seeing is a coil pack swap between #1 & #2. If it fails again with an error and it’s followed the same coil, just replace it. You don’t know that the repair they did on the coil is good.


Sent from my iPhone using Tapatalk
by jhalfhide
Sat Jul 28, 2018 12:24 pm
Forum: Technical discussions
Topic: Front Sprocket nut righty tighty lefty loosey?
Replies: 5
Views: 771

Re: Front Sprocket nut righty tighty lefty loosey?

100nm is the manual’s recommendation. I didn’t have an extension for my torque wrench so couldn’t get in there. Ended up gunning it back on [emoji23]


Sent from my iPhone using Tapatalk
by jhalfhide
Fri Jul 27, 2018 5:27 pm
Forum: Technical discussions
Topic: Front Sprocket nut righty tighty lefty loosey?
Replies: 5
Views: 771

Re: Front Sprocket nut righty tighty lefty loosey?

It’s the usual lefty loosey. Mine took a 450nm electric impact gun and still didn’t budge for a while [emoji51]


Sent from my iPhone using Tapatalk
by jhalfhide
Thu Jul 19, 2018 12:01 am
Forum: Accessories
Topic: LIGHT Bulb for Auxilliary lights on SMT
Replies: 3
Views: 769

Re: LIGHT Bulb for Auxilliary lights on SMT

No idea unfortunately, they were on the bike when I purchased it.


Sent from my iPhone using Tapatalk
by jhalfhide
Fri Jul 13, 2018 7:18 am
Forum: Accessories
Topic: LIGHT Bulb for Auxilliary lights on SMT
Replies: 3
Views: 769

Re: LIGHT Bulb for Auxilliary lights on SMT

They’re LED and I believe, sealed units with no bulb replacement. You could just get a cheaper set, like my safego ones, and wire them up to the same wires for the same operation.

Image


Sent from my iPhone using Tapatalk
by jhalfhide
Wed Jul 11, 2018 7:50 am
Forum: Teething problems
Topic: GRRRRR Shop screwed up my fuel level sensor
Replies: 2
Views: 605

GRRRRR Shop screwed up my fuel level sensor

Back to dealer.
by jhalfhide
Sun Jul 08, 2018 4:45 pm
Forum: Technical discussions
Topic: Which oil to use?
Replies: 7
Views: 1245

Which oil to use?

Castrol Power One Racing 10w50. Been using it yonks and bike likes it more than OEM


Sent from my iPhone using Tapatalk
by jhalfhide
Sat Jul 07, 2018 4:39 pm
Forum: Technical discussions
Topic: HELP my bike is beeping
Replies: 6
Views: 866

Re: HELP my bike is beeping

So what openings did the map have before. Maybe your flies were barely open, creating the whistling (big air, tiny gap). If opening the flies has cured it, I’d either leave them as they are or go back to the old map but increase the openings at that rpm range by 10% Sent from my iPhone using Tapatalk
by jhalfhide
Fri Jul 06, 2018 7:26 pm
Forum: Technical discussions
Topic: HELP my bike is beeping
Replies: 6
Views: 866

Re: HELP my bike is beeping

You’re right, that’d drive me mental. Sounds like a Girl Scouts whistle rather than a snarling beast.

I think you’ve got an air leak somewhere. Double check your air box fitment, check the rubbers around the throttle bodies too.


Sent from my iPhone using Tapatalk
by jhalfhide
Sun Jul 01, 2018 10:15 am
Forum: Technical discussions
Topic: Cheap air box that works
Replies: 335
Views: 122038

Re: Cheap air box that works

A foam filter will always break down eventually, but I’ve got 9000 miles on mine and no signs of it yet. Are you keeping it oiled enough? They’re not exactly expensive either so if I have to replace every 4-5 years, it’s not an issue. Cleaned mine last service and it came out fine. Sent from my iPho...
by jhalfhide
Sun Jul 01, 2018 7:58 am
Forum: Teething problems
Topic: Rear brake lever is contacting clutch case
Replies: 10
Views: 2495

Re: Rear brake lever is contacting clutch case

It was indeed the bearings in the brake pedal. I purchased them from a KTM dealer. They come individually so order 2. Getting them in/out is fun [emoji19]


Sent from my iPhone using Tapatalk
by jhalfhide
Sat Jun 30, 2018 7:14 am
Forum: Exhausts
Topic: Akrapovic Noise Reduction Insert
Replies: 5
Views: 5491

Re: Akrapovic Noise Reduction Insert

No problem, glad you got it sorted.


Sent from my iPhone using Tapatalk
by jhalfhide
Fri Jun 29, 2018 7:57 am
Forum: Exhausts
Topic: Akrapovic Noise Reduction Insert
Replies: 5
Views: 5491

Re: Akrapovic Noise Reduction Insert

They do different angles so check your pipes with a protractor


Sent from my iPhone using Tapatalk
by jhalfhide
Thu Jun 28, 2018 7:11 pm
Forum: Exhausts
Topic: Akrapovic Noise Reduction Insert
Replies: 5
Views: 5491

Re: Akrapovic Noise Reduction Insert

PipeWerx make some aftermarket ones. They’re listed on eBay UK. Not sure about your side.
https://rover.ebay.com/rover/0/0/0?mpr ... 1225215577


Sent from my iPhone using Tapatalk
by jhalfhide
Tue Jun 26, 2018 10:50 am
Forum: Exhausts
Topic: Do you know DOMINATOR exhaust
Replies: 22
Views: 13081

Re: Do you know DOMINATOR exhaust

The sensor is in the headers so these exhausts would work


Sent from my iPhone using Tapatalk