Search found 482 matches

by DaveNZ
Wed Sep 19, 2018 8:13 pm
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

Wish the factory would come out with a map for the GT like they did for the 1290R, that map made huge difference to the R, it turned Sport into an angry child.
by DaveNZ
Wed Sep 19, 2018 6:38 am
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

DaveNZ Ride the GT. Your m8 will be smiling down at you and he would appreciate it .👍 🍻DaveW Im defiantly taking the GT, I've just finished washing it, will give it a polish tomorrow before the funeral. My mate that just died has a 690R SM, a 990 Super duke, and 2 weeks back he brought himself an 8...
by DaveNZ
Tue Sep 18, 2018 8:06 pm
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

Ok, so I order the O2 removal kit from rotty, and the SAS removal kit, and I should be ok without mapping right? I'm using a healtech servo eliminator right now. Sent from my SM-G935V using Tapatalk My bike runs great, i could even run a quicker flow air filter with the O2 sensor removal. I have th...
by DaveNZ
Tue Sep 18, 2018 10:46 am
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

The SAS is pointless with the CAT removed as thats what the SAS does, it lets air into the exhaust system to facilitate a secondary burn in the CAT. The O2 sensors are designed to run lean as to pass EU regulations, and by removing the CAT it runs even leaner. The first thing to go on my bike was th...
by DaveNZ
Mon Sep 17, 2018 6:45 am
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

The GT does run ok with the link pipe, but it does run a little lean up to 5500 revs, Rottweiler O2 removal kit helps richen the low end fueling.
by DaveNZ
Mon Sep 17, 2018 6:42 am
Forum: Teething Problems
Topic: Any reliable SD-GT's out there?
Replies: 77
Views: 15843

Re: Any reliable SD-GT's out there?

^^ Put some PR5s on next, they are a great tire. I'm on my 5th set of tires on my GT, Stock Angel GTs, Metz M7RRs, 2 sets of Roadtec O1s, now my first set of PR5s, and i like these best as of their alround performance and hopefully long gevity.
by DaveNZ
Fri Sep 14, 2018 9:55 pm
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

Cheers Dave I’m now considering getting the puig belly pan but can’t find any full side on profile pics of it fitted. Cheers Paul Ps bikes running great without a new fuel map and dealer assures me it will be fine. I was considering the power commander but I can’t get my head around if you set up a...
by DaveNZ
Fri Sep 14, 2018 7:17 am
Forum: Exhausts
Topic: Remus link pipe heat shield
Replies: 26
Views: 540

Re: Remus link pipe heat shield

Nice look there PK1, no CAT also, way to go bro.
by DaveNZ
Wed Sep 12, 2018 6:58 am
Forum: Teething Problems
Topic: Well That Was a Surprise...
Replies: 83
Views: 8003

Re: Well That Was a Surprise...

:lol: ...... what happens when the fish aren't biting....... go home via the local fish shop......... so the boss keeps thinking you are working hard to provide for the family when you go out boating..... :lol: Mate, you live in paradise...... :mrgreen: Hey Aussie Dave, I've never had a days fishin...
by DaveNZ
Mon Sep 10, 2018 7:51 am
Forum: Teething Problems
Topic: Well That Was a Surprise...
Replies: 83
Views: 8003

Re: Well That Was a Surprise...

Nice DaveNZ Worth getting cold for.Have you seen the price of fish in the super markets !!!!! Enjoyed your tea I bet 👍 🍻DaveW Cheers DaveW, Me the wife and the dog have had 2 nights of fresh snapper, and gave half to my son, he came fishing with me, and he caught the 3.8kg snapper, he and his flat ...
by DaveNZ
Sun Sep 09, 2018 5:34 am
Forum: Teething Problems
Topic: Well That Was a Surprise...
Replies: 83
Views: 8003

Re: Well That Was a Surprise...

Spring is here finally, went fishing this morning, chilly, but mildly successful. Fresh snapper for tea. (dinner)
by DaveNZ
Fri Sep 07, 2018 7:09 am
Forum: Teething Problems
Topic: Well That Was a Surprise...
Replies: 83
Views: 8003

Re: Well That Was a Surprise...

DaveW wrote:
Thu Sep 06, 2018 2:04 am
I agree with that DaveNZ
I've just brought myself a new pr of winter gloves🌧🌧🌧 !!!!
🍻DaveW
I recently brought myself a summer leather jacket, jumped the gun me thinks.
by DaveNZ
Mon Sep 03, 2018 8:27 pm
Forum: Teething Problems
Topic: Well That Was a Surprise...
Replies: 83
Views: 8003

Re: Well That Was a Surprise...

mick shere wrote:
Mon Sep 03, 2018 12:47 pm
Glad all is going well guys, we are starting the slippery slide into Autumn over here..
Spring here now, wish i could say we are on the grippy side, but today is forecast for 12C a strong Southerly, snow on the high country, this looks to be our coldest day of winter. FUK, come on sun.
by DaveNZ
Mon Sep 03, 2018 6:21 am
Forum: Random chatter
Topic: De cat pipe no re map now done
Replies: 6
Views: 849

Re: De cat pipe no re map now done

Yup bike well run fine, but without a remap ur guaranteed to run on the lean side, therefore run hotter causing long term premature wear. Sent from my iPhone using Tapatalk With the O2 sensors removed and the Rottweiler dongles the bike doesn't run lean. the lower rev closed circuit is designed to ...
by DaveNZ
Sat Sep 01, 2018 10:44 am
Forum: Random chatter
Topic: De cat pipe no re map now done
Replies: 6
Views: 849

Re: De cat pipe no re map now done

Ive removed the SAS system, (Rottweiler stage 2 kit) fitted a Remus link pipe and muffler, removed the exhaust valve motor, and fitted the Healtech ESE, the bike ran ok, i then fitted the Rottweiler O2 sensor removal dongles and exhaust plugs, and the bike runs very nice, smooth around town, and pul...
by DaveNZ
Sun Aug 26, 2018 8:22 pm
Forum: Exhausts
Topic: Open exhaust can
Replies: 9
Views: 850

Re: Open exhaust can

Stpsd, Bodis makes a HEADER?? Got a link?? Looking for a header with 18mm O2 bungs for my 2017 KTM SDGT. Arrow does not make one for the KTM GT. Presently, will have to remove the OEM header, have someone drill new holes for the 18mm O2 bungs (position is important) & send off for ceramic coating. ...
by DaveNZ
Sun Aug 26, 2018 8:11 am
Forum: Exhausts
Topic: Exhaust valve dongle
Replies: 47
Views: 6148

Re: Exhaust valve dongle

KiwiDes, You will be pleased to finally have your link pipe fitted 👍 How is the sound and any noted performance from the stock exhaust ? Next weekend we are heading up to kaikoura for lunch and then on the 15th Sept heading to Karamea for an overnighter. A 800 km round trip. Looking forward to that...
by DaveNZ
Fri Aug 24, 2018 5:27 am
Forum: Exhausts
Topic: Exhaust valve dongle
Replies: 47
Views: 6148

Re: Exhaust valve dongle

Hi team I finally got myself the dongle last week. Unplugged the servo motor and turned the key on MTC failure came up (what its meant to do) Plugging in the dongle- turned on the key.... wow no flashing lights or warnings 🤗 Took her for a ride around the block as ran sweet as.. I haven't taken out...
by DaveNZ
Fri Aug 24, 2018 5:25 am
Forum: Exhausts
Topic: Open exhaust can
Replies: 9
Views: 850

Re: Open exhaust can

I guess the cheap route ain’t going to cut it! Have done nothing to the stock setup other than remove the carbon canister under the passenger seat. You guys talking about the link pipe replacement sounds like the best move in conjunction with dongle $$$ solution. Guess I save up until or before my ...
by DaveNZ
Fri Aug 24, 2018 5:18 am
Forum: Introductions!
Topic: GT missing from KTM site
Replies: 33
Views: 3352

Re: GT missing from KTM site

I took mine for the brake recall and spent most of the time drinking free coffee and staring at the 2018 black gt, really smart looker.. when I left I found I had "impulse" bought the akropovic black slip on... it's actually quieter than the original but far nicer sound :-) Man, id like one of thos...