Search found 40 matches

by Daniro
Thu Nov 01, 2018 12:51 pm
Forum: Technical discussions
Topic: 2015 SD Clutch replacement
Replies: 9
Views: 1017

Re: 2015 SD Clutch replacement

Thanks guys for both advices, I really appreciate it. Being that myh level of mechanic knowledge is not on that level yet, I took the bike to the shop so proper mechanics can work on it. Another problem i forgot to mention before that i had was when upshifting to 5th gear on high rpm, shift lever ha...
by Daniro
Mon Oct 29, 2018 7:01 am
Forum: Technical discussions
Topic: 2015 SD Clutch replacement
Replies: 9
Views: 1017

Re: 2015 SD Clutch replacement

On the road I am but on the track, not sure bout it. I hve 33000 km on the clock so that is probably another contributing factor. I got QS few months ago but didnt wanna install it untill the dealer checks my gearbox for any damage. Be honest I havent noticed any revi increase or sliding of that typ...
by Daniro
Sun Oct 28, 2018 7:09 pm
Forum: Technical discussions
Topic: 2015 SD Clutch replacement
Replies: 9
Views: 1017

Re: 2015 SD Clutch replacement

Yup, i preffer using clutch on upshift. Its too jearky in my case ( probably diong it wrong) when i upshift without clutch, especially mid corner. Im gonna have a look, would like to avoid grinding gears and bending selector forks because of this.. Thanks for the advice man! :)
by Daniro
Sat Oct 27, 2018 5:55 am
Forum: Technical discussions
Topic: 2015 SD Clutch replacement
Replies: 9
Views: 1017

Re: 2015 SD Clutch replacement

I never changed levers, to be honest, i did maybe 20 track days and a lot hard riding on mountain roads where i live. Never installed quickshifter so i think this might be the case. If I try to start a bike in 1st gear with lever pulled in , when i crank it, the bike just starts moving forward, like...
by Daniro
Sat Oct 27, 2018 4:22 am
Forum: Technical discussions
Topic: 2015 SD Clutch replacement
Replies: 9
Views: 1017

2015 SD Clutch replacement

Hey guys, i think my clutch is fried from all the track riding i do, so since im not too techincally inclined, i'd like to ask for advice. I was looking on the internet, but couldn't find too many options aside from OEM clutch kit. Does anyone have any recommendation for a replacement kit, prefferab...
by Daniro
Wed Sep 19, 2018 10:37 pm
Forum: Technical discussions
Topic: IRC Quickshifter with autoblipper
Replies: 5
Views: 1376

Re: IRC Quickshifter with autoblipper

I ended up getting Healtech, the fuel cutting one.
by Daniro
Thu Aug 30, 2018 11:54 pm
Forum: Technical discussions
Topic: SD 990 belly pan on SD1290
Replies: 4
Views: 779

SD 990 belly pan on SD1290

Guys im curious, I've been looking for some belly pan for my SD, but didn't find any that i liked. Since I had 990 before i loved the looks of that one? Did anyone try to fit SD 990 belly pan on a 1290? Not sure if 990 had oil cooler there and if it used it for mounting but i think 1290 would look s...
by Daniro
Fri Aug 03, 2018 6:48 pm
Forum: Technical discussions
Topic: 18 SDR Handlebar position
Replies: 1
Views: 995

Re: 18 SDR Handlebar position

Check Owners manual, you have section about position of the handlebars and ergonomy. I set my handlebar clamp on front mounting holes on tripleclamp as recommended for track use ( since i do track day every month) and rotated bars forward to -1 mark. Check yours and see where is the mark and you can...
by Daniro
Fri Aug 03, 2018 3:16 pm
Forum: Technical discussions
Topic: IRC Quickshifter with autoblipper
Replies: 5
Views: 1376

Re: IRC Quickshifter with autoblipper

I already did, but no reply for over a month. I think im gonna go with Healtech and just rewire it so i can blip on downshifs and thats it. The bike is awesome as it is already.
by Daniro
Fri Jun 29, 2018 10:28 am
Forum: Technical discussions
Topic: IRC Quickshifter with autoblipper
Replies: 5
Views: 1376

IRC Quickshifter with autoblipper

I'm in pursuit of good quickshifter for my Duke for a while now, and was looking at couple of options such as Healtech or Dynojet with PCV but none of them offered both up and down shift. Now this IRC offers exactly that but it says nowhere if it cuts fuel or ignition. As far as I know 1290 engine l...
by Daniro
Wed Feb 28, 2018 6:23 am
Forum: Technical discussions
Topic: Oil temperature high!!!
Replies: 3
Views: 1116

Re: Oil temperature high!!!

Just an update for someone who might have the same issue like me, apparently it was faulty oil tem sensor, at teh beginnging was reading super high temperature, at one point going over 150 degrees even. After I stopped the bike it started showing values going from 0 to 150 and back constantly. Techs...
by Daniro
Sat Feb 24, 2018 2:11 pm
Forum: Technical discussions
Topic: Oil temperature high!!!
Replies: 3
Views: 1116

Oil temperature high!!!

Guys I need quick help, had an issue today during the ride, my oil temperature went 140 degrees Celsius high, and when I checked coolant level, overflow tank was almost empty. Now this happened one day after I got my bike back from service. I had no warning on the dash, coolant temp was just fine, 4...
by Daniro
Sat Feb 24, 2018 2:05 pm
Forum: Accessories
Topic: Ohlins rear
Replies: 3
Views: 888

Re: Ohlins rear

No bro, I never pushed it to the limits even tho i ride on the track. I mean the bike is not meant to be ridden over bumps after all. As long as you ride it on tarmac roads you will be ok :)
by Daniro
Wed Feb 21, 2018 6:01 pm
Forum: Accessories
Topic: Ohlins rear
Replies: 3
Views: 888

Re: Ohlins rear

Don't waste money. If you are not racing it just set up the sag with some good suspension tech and you will be fine. I'm 110 kgs, had my sag set up by Gary Reynders, google the guy, he worked with Pedrosa, Dovi etc, now he's a crew chief for a world supersport team. He said that rear suspension on S...
by Daniro
Sat Feb 17, 2018 6:27 pm
Forum: Teething problems
Topic: Ktm sdr 2017 Brembo brake recall master cylinder
Replies: 11
Views: 2061

Re: Ktm sdr 2017 Brembo brake recall master cylinder

Official recall for KTM should start March 3rd, and not all the models are affected. Who ever has a doubt, can check on KTM website, with VIN number delivery certificate number as well. I checked mine the other day MY2015, not affected by recall but still checking with my dealer at the moment to be ...
by Daniro
Mon Feb 05, 2018 6:53 pm
Forum: Technical discussions
Topic: SAS Canisterectomy throws engine light
Replies: 12
Views: 1546

Re: SAS Canisterectomy throws engine light

in that case you just need the error to be deleted by KTM diagnostic tool, otherwise you have no problem with the engine and how it runs, it's just the computer throwing an error since it's not reading official map. No Dyno will sort that out since only the dealers are having KTM dg tool/machine for...
by Daniro
Sun Feb 04, 2018 8:46 pm
Forum: Technical discussions
Topic: SAS Canisterectomy throws engine light
Replies: 12
Views: 1546

Re: SAS Canisterectomy throws engine light

Man, remap the ECU! :)
by Daniro
Fri Feb 02, 2018 11:08 am
Forum: Technical discussions
Topic: SAS Canisterectomy throws engine light
Replies: 12
Views: 1546

Re: SAS Canisterectomy throws engine light

Told ya it was the map problem. Glad you sorted it out.
by Daniro
Sun Jan 28, 2018 6:37 pm
Forum: Technical discussions
Topic: SAS Canisterectomy throws engine light
Replies: 12
Views: 1546

Re: SAS Canisterectomy throws engine light

Engine light is going off because of "wrong" air/fuel mixture according to ECU which even with dongle instead of SAS is getting more air into the mix and running too lean and needs flashing/remapping. It's not like BMW which ECU has autotune so it adjusts after this mods itself.
by Daniro
Sun Jan 28, 2018 1:39 pm
Forum: Technical discussions
Topic: SAS Canisterectomy throws engine light
Replies: 12
Views: 1546

Re: SAS Canisterectomy throws engine light

Did you remap the engine? This might be the reason if you didn't. If you did, sometimes even with the dealers happens that their diagnostic tool gets some glitch and screws up the map. Happened to me that when remapping with Akra Evo map i got all the interface from Superduke GT for the features I d...