Search found 401 matches

by Magic Wand
Tue Nov 13, 2018 4:18 pm
Forum: Technical discussions
Topic: Replacement Clutch Master Cylinder (Magura)
Replies: 19
Views: 6808

Re: Replacement Clutch Master Cylinder (Magura)

Aha, I think I got it.
The perch is the clamp mirror and the 'switch' is the clutch lever. Have a look here:

https://www.ktmshop.se/index.php?action ... #partslist

Haven't tried to demount it myself, but isn't is just a screw from top and a nut underneath?

/M
by Magic Wand
Thu Nov 08, 2018 4:25 pm
Forum: Technical discussions
Topic: Replacement Clutch Master Cylinder (Magura)
Replies: 19
Views: 6808

Re: Replacement Clutch Master Cylinder (Magura)

Switch from the perch?
Sorry, not familiar with 'perch' - what is it? And what switch are you talking about?

/M
by Magic Wand
Tue Nov 06, 2018 7:24 pm
Forum: Your adventures..
Topic: Has The Forum Died? Been Anywhere on your Kato?
Replies: 20
Views: 2295

Re: Has The Forum Died? Been Anywhere on your Kato?

No
Have no pictures from this year
No

:lol:

/M
-
by Magic Wand
Thu Nov 01, 2018 10:46 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 13
Views: 4294

Re: Parts needed - hopefully

Hi all Today 1:st of November I picked up the bike at the workshop - for where it has been situated the last 5 months... (I told them early in June that there is no hurry to get the bike ready, due to my fractures at the lower right leg and shoulder problem and 'finger failure') Anyhow I'm able to w...
by Magic Wand
Thu Nov 01, 2018 10:38 pm
Forum: Technical discussions
Topic: Engine only runs up to half throttle!
Replies: 2
Views: 787

Re: Engine only runs up to half throttle!

Hi all. Update. I picked up the bike from the workshop today 1:st of November and everything is working great. They didn't do anything about the secondary's except to mount them. The diognos tool didn't say that something was wrong, and it was proved by the engine to run as it is supposed to do :) M
by Magic Wand
Wed Oct 17, 2018 9:05 pm
Forum: Technical discussions
Topic: 2010 SMT has been in shop for six weeks!
Replies: 17
Views: 1615

Re: 2010 SMT has been in shop for six weeks!

Hi 'SuaveDave' I'm onto the same route as 'limeyduffa' - soon it's nescessary to try out eVerytHinG... I have the 990 2010 as well. During the hot period in July 2015, the idle went away... just like that, suddenly. It happened a few times during 1 week, and when thinking about it I remembered I did...
by Magic Wand
Sat Oct 06, 2018 9:57 am
Forum: Teething problems
Topic: Sump plug still leaking
Replies: 4
Views: 470

Re: Sump plug still leaking

Next step c/would be to remove the Helicoil, drill e clean area and let somebody tig weld new material in. Then drill and tap new threads (or Helocoil).

/M
by Magic Wand
Fri Oct 05, 2018 6:02 pm
Forum: Teething problems
Topic: Sump plug still leaking
Replies: 4
Views: 470

Re: Sump plug still leaking

What kind of washer did you put on the screw? Copper, aluminium?
Maybe you should try some tape for threads? Don't know the name of it.
Or Loctite that you can remove?

/H
by Magic Wand
Thu Sep 13, 2018 2:15 pm
Forum: Technical discussions
Topic: Drop in oil pressure during high speed running.
Replies: 57
Views: 5504

Re: Drop in oil pressure during high speed running.

I agree wth 'jhalfhide'. Send the pictures to KTM and give them the chance to give their oppinion of what has happened in that engine.
Also, if possible, send them the data's WHEN and at what milage the oil and filters were changed.

/M
-
by Magic Wand
Sat Sep 01, 2018 3:22 pm
Forum: Technical discussions
Topic: Problem with the rear sprocket nuts?
Replies: 15
Views: 3193

Re: Problem with the rear sprocket nuts?

Hi all

This is how a solved the problem to make the bolts to come loose - search the forum for:
'Loose rear sprocket nut'

/M
by Magic Wand
Fri Aug 31, 2018 9:37 pm
Forum: Technical discussions
Topic: Excessive wear on rear sprocket
Replies: 7
Views: 916

Re: Excessive wear on rear sprocket

Hi 'Elvis'
Maybe a stupid question, but is that aluminum rear sprocket?
The excessive wear appears to be at the top of the teeths - correct? That's odd, I havn't seen anything like that. Not even at motocross bikes.
Sorry, I have no explanation.

/M
by Magic Wand
Thu Aug 30, 2018 9:19 pm
Forum: Technical discussions
Topic: 2010 990 SMT rear shock adjustment made a little easier.
Replies: 2
Views: 722

Re: 2010 990 SMT rear shock adjustment made a little easier.

Hmmm....
That C-spanner is not included in the bag with tools to my 2010 bike... :?
Nice way of doing it though! :)

/M
by Magic Wand
Mon Aug 27, 2018 9:55 am
Forum: Technical discussions
Topic: Chain guide questions
Replies: 5
Views: 761

Re: Chain guide questions

I should of guessed that... Sorry, but there is no idea to try make new threads in the thin aluminium swinging arm. It is M5 threads from the beginning, and I tried to make M6, but then there is only a few threads in the material, thus make the screw fall out (or in?!) again... Don't even think abou...
by Magic Wand
Mon Aug 27, 2018 9:45 am
Forum: Technical discussions
Topic: Coolant change
Replies: 13
Views: 1311

Re: Coolant change

Good! 8-)

You mean to fill coolant liquid in the radiator filling hole? No, but it is a bit tricky to fill the liquid. I do recommend you to use a funnel with a hose attached to it. Makes it MUCH easier!

I have no experience of Maxima Coolanol.
Maybe somebody else knows about that product?

/M
by Magic Wand
Sun Aug 26, 2018 9:04 am
Forum: Technical discussions
Topic: Coolant change
Replies: 13
Views: 1311

Re: Coolant change

Haha :D No, there is no box or something placed underneth the ingine. The black thing is a rubber floor mat and you can see the extension of it through the rear wheel spokes ;) The light grey area 'above' the black rubber mat is the floor. 'Under' the black rubber mat is another rubber mat, but in a...
by Magic Wand
Sat Aug 25, 2018 8:13 pm
Forum: Teething problems
Topic: Clutch Slave
Replies: 24
Views: 7269

Re: Clutch Slave

Hi 'gab1'

Buy the Oberon clutch slave.

Mounting plate? I don't know what that is. Could you explain, please?

I havn't noticed any cluth slip during the 40000 km I owned my 990 SMt -10. In total it's 57000 km on the ODO.

/M
by Magic Wand
Sat Aug 25, 2018 8:06 pm
Forum: Technical discussions
Topic: Coolant change
Replies: 13
Views: 1311

Re: Coolant change

Are you talking about the blue steel plate?!
Ohhh noo.. thats the ramp for the lift, to get the bike up on it the regular direction :)

/M
by Magic Wand
Fri Aug 24, 2018 9:57 am
Forum: Technical discussions
Topic: Chain guide questions
Replies: 5
Views: 761

Re: Chain guide questions

OK, mount the new screw and bush, and keep an eye on it regularely! I might been thinking a bit off yesterday. I believe you have loosen and demount the front sprocket to get it out of the way to remove the old chain guide and mount the new one. I bought my 2010 in 2015 with 17090 km on the clocks, ...
by Magic Wand
Fri Aug 24, 2018 9:53 am
Forum: Technical discussions
Topic: Coolant change
Replies: 13
Views: 1311

Re: Coolant change

8-)

/M
by Magic Wand
Thu Aug 23, 2018 8:07 pm
Forum: Technical discussions
Topic: Chain guide questions
Replies: 5
Views: 761

Re: Chain guide questions

Hi 'Zombie Master'. Yes, if I remember correct it is possible to replace the old chainguide with a new one, when chain is still in place. But I think you need to loosen the rear wheel axle (spindle?) nut, tighten the adjusters as far the go in and push the wheel forward as long as possible to get mo...