Search found 375 matches

by Magic Wand
Mon Jul 16, 2018 10:07 pm
Forum: Technical discussions
Topic: Not so smooth gears?
Replies: 4
Views: 212

Re: Not so smooth gears?

Really? Havn't tried that. So pull the clutch lever and then just a short twist on the throttle to rev a bit and put in the 1:st gear when rev is 'dropping'?

/M
by Magic Wand
Mon Jul 16, 2018 10:04 pm
Forum: Orange, Silver, Black or ?
Topic: First ktm
Replies: 5
Views: 237

Re: First ktm

Hi 'gab1' ! And very much welcome to the forum :-) I have the same colors on my 2010, with 57000 km. I'll put up a pic of it. Here it is: KTM 990 SMt -10.jpg Only thing that differs is the Alpinestar decal on the rear plastic close to seat ;-) And of course the wind screen. Mine is a PUIG oturing, 1...
by Magic Wand
Sat Jul 14, 2018 5:01 pm
Forum: Technical discussions
Topic: Not so smooth gears?
Replies: 4
Views: 212

Re: Not so smooth gears?

Hi 'Hardyrider' SMt 2010 with 57000 km. It's the same on my bike, a quite big 'clunk' when putting in first after being in Neutral. A bit better with warm engin but not too much difference. 0,3 standard oil jet. Sweden, and it's not to hot weather normally. Except this summer of course! Crazy temper...
by Magic Wand
Wed Jul 11, 2018 11:44 am
Forum: Technical discussions
Topic: Side stand sensor failure
Replies: 13
Views: 563

Re: Side stand sensor failure

Hi M It's either going to be a reed switch (mechanical), or a Hall Effect sensor (solid state). If it's the latter, it should be very reliable. Regarding your last point, my understanding of the side stand sensor is if the stand goes down when bike is in gear, engine is cut ?. If that is the case, ...
by Magic Wand
Mon Jul 09, 2018 8:16 pm
Forum: Technical discussions
Topic: Side stand sensor failure
Replies: 13
Views: 563

Re: Side stand sensor failure

Hi 'limey' Don't know if the hall effect sensor is the same as a side stand sensor. Do you talk about the magnetic inside the unit? Tragical story about the side stand that came down and killed the HD dude... :/ The stand came down in a right hand curve and when next left hand curve... bad. (But tha...
by Magic Wand
Mon Jul 09, 2018 10:00 am
Forum: Technical discussions
Topic: Side stand sensor failure
Replies: 13
Views: 563

Re: Side stand sensor failure

Hi 'bambadoo'! Sorry, I have no experience from a bypass dongle at all. Is it a problem that you need to use Neutral when starting the engine? I always do that... No reason to start it with gear in position. /M - Hej hej! Jag har ingen erfarenhet av egentillverkad bypass till sidstödssensorn. Däremo...
by Magic Wand
Sun Jul 08, 2018 10:11 pm
Forum: Technical discussions
Topic: Which oil to use?
Replies: 4
Views: 236

Re: Which oil to use?

I bought Q8 SBK Racing 10W-50. Works perfect in the engine on my SMt 2010.

/M
by Magic Wand
Mon Jul 02, 2018 10:31 am
Forum: Teething problems
Topic: Clutch jet being a bugger.
Replies: 4
Views: 486

Re: Clutch jet being a bugger.

Here it is:

viewtopic.php?f=13&t=5431

/M
-
by Magic Wand
Thu Jun 28, 2018 9:33 pm
Forum: Teething problems
Topic: Clutch jet being a bugger.
Replies: 4
Views: 486

Re: Clutch jet being a bugger.

Search the forum! There is at least one very good thread about how to take that oil jet out.

/M
by Magic Wand
Tue Jun 26, 2018 3:56 pm
Forum: Exhausts
Topic: Do you know DOMINATOR exhaust
Replies: 22
Views: 5184

Re: Do you know DOMINATOR exhaust

MichaelheK wrote:
Tue Jun 26, 2018 10:43 am
I might be interested in your for exhaust if you sell it.as long as it's a lambda sensor model.I think 08 were.let me know.thanks.
Are you talking to me?
I have already sold the Dominator HP1 silencers last year, to a guy in Ukraine :-)

/M
-
by Magic Wand
Tue Jun 19, 2018 9:34 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 9
Views: 1193

Re: Parts needed - hopefully

Hi 'CatDaddysBBQ' and 'Blakey58'! Thank's for your support guys! I appreciate it much, and I like the way you're thinking! Hmmm.... Blakey, you make me think of something 'crazy'; maybe I should buy the white fuel tank plastic panels from you, and use left side orange and right side white! Haha! :lo...
by Magic Wand
Sat Jun 16, 2018 12:05 pm
Forum: Technical discussions
Topic: Clutch problem
Replies: 12
Views: 820

Re: Clutch problem

Great with the Oberon slave cylinder!
Me as well replaced the original slave to an Oberon, 'some miles' ago - and at the same time I changed the mineral oil to Castrol Front Fork oil 5W.
The engine and the original master slave has been running for more than 57000 km.

/M
by Magic Wand
Fri Jun 15, 2018 11:14 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 9
Views: 1193

Re: Parts needed - hopefully

Yes that's what I say as well.

I think the front brake master cylinder is still in good shape. Couldn't see any damage on it at all. No leaks and so on.

Thanks!

/M
by Magic Wand
Thu Jun 14, 2018 9:59 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 9
Views: 1193

Re: Parts needed - hopefully

Update. 25 days after accident and 23 days after surgery. My body recovery is like... more or less unnoticeable improvements... :( Well, that not true - in fact the plastic from the right leg was cut of Tuesday 5th of June and the stiches cut away as well. Everything looked good. X-ray the same day ...
by Magic Wand
Thu Jun 14, 2018 9:25 pm
Forum: Teething problems
Topic: Splitting the cases !
Replies: 15
Views: 1108

Re: Splitting the cases !

Interesting!
But... where s the pictures...? Can't see them mate.

/M
by Magic Wand
Mon Jun 11, 2018 9:54 pm
Forum: Technical discussions
Topic: Clutch problem
Replies: 12
Views: 820

Re: Clutch problem

Hi 'Herb'!

Me as well recommend you to have a read through the thread that 'limeyduffa' put up the link to.
Read it and yu will learn a lot about the clutch oil jet, Oberon slave cylinder, type of oil to use in the system and more.

/Magic
by Magic Wand
Sun Jun 10, 2018 10:44 am
Forum: Teething problems
Topic: Rusted/captive engine bolt nut
Replies: 5
Views: 843

Re: Rusted/captive engine bolt nut

Hi 'Limey'!
So the engine is out from the frame. Did you do it by yourself or the workshop?
Difficult?
Take some photos from 'inside' if there is a chance! Very interested to see how it looks like :)

/Magic
by Magic Wand
Fri Jun 01, 2018 1:55 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 9
Views: 1193

Parts needed - hopefully

Hi all at the forum. KTM SMt -10.jpg Sadly I had an accident with my beautiful SMt, which I have loved from the first moment I tried it. Sand/gravel on the road coused the accident, I fell from about 30-40 km/h at the right side into the asphalt. The bike slipped for approx. 4-5 meter, then stopped....
by Magic Wand
Sun May 06, 2018 8:24 pm
Forum: Orange, Silver, Black or ?
Topic: Would you change an SMT for a 1090 Adventure
Replies: 10
Views: 1401

Re: Would you change an SMT for a 1090 Adventure

Hi 'STU'

I would go 2 steps up; try the 1190 Adv.

/M
-
by Magic Wand
Fri Apr 27, 2018 10:09 pm
Forum: Orange, Silver, Black or ?
Topic: Back in Black
Replies: 7
Views: 790

Re: Back in Black

Ohhh nooo 'sabestian'! Don't you try with me...(!) :D
(I didn't write that sentence about carbon look!)

Mine is almost all in gloss black now - and is MUCH nicer than the boring and 'dirty' matt black.

/M
-