Search found 357 matches

by Magic Wand
Sun May 06, 2018 8:24 pm
Forum: Orange, Silver, Black or ?
Topic: Would you change an SMT for a 1090 Adventure
Replies: 9
Views: 701

Re: Would you change an SMT for a 1090 Adventure

Hi 'STU'

I would go 2 steps up; try the 1190 Adv.

/M
-
by Magic Wand
Fri Apr 27, 2018 10:09 pm
Forum: Orange, Silver, Black or ?
Topic: Back in Black
Replies: 7
Views: 607

Re: Back in Black

Ohhh nooo 'sabestian'! Don't you try with me...(!) :D
(I didn't write that sentence about carbon look!)

Mine is almost all in gloss black now - and is MUCH nicer than the boring and 'dirty' matt black.

/M
-
by Magic Wand
Thu Apr 26, 2018 7:20 pm
Forum: Orange, Silver, Black or ?
Topic: Back in Black
Replies: 7
Views: 607

Re: Back in Black

Welcome dude 8-)

Wow! Only 6300 km...(!)
Congratulations to a very good motorcycle :-)

It's very nice to paint the front fener in gloss black as well. Every part is nicer with gloss black, in my holy opinion.

/M
-
by Magic Wand
Thu Apr 26, 2018 7:14 pm
Forum: Random chatter
Topic: 990 smt ECU remaped yesterday
Replies: 2
Views: 211

Re: 990 smt ECU remaped yesterday

Hi 'gordy'!

Nice that you are satisfyed with the Dyno remap!

Could you please tell what have been done to the engine, such as SAS, airfilter change, Lambda and so on?
And also, it would be good to hear about the fuel consumption after the mapping.

/M
-
by Magic Wand
Wed Apr 25, 2018 7:52 pm
Forum: Technical discussions
Topic: KTM heated grips
Replies: 34
Views: 6704

Re: KTM heated grips

Answering my own question: I connected wrong wires... I was in a physical stress mode and didn't think of what I actually was doing... So guys who are going to install heat grips - READ the instruction AND have a good look at the picture that shows how to connect everything!!! The heat grips works a...
by Magic Wand
Tue Apr 24, 2018 8:06 pm
Forum: Technical discussions
Topic: KTM heated grips
Replies: 34
Views: 6704

Re: KTM heated grips

I know, more than 4 year old thread, but still up and running :) I'v bought KTM original heated grips. Tried to install them, but just like 'Creamcycle' all 4 lamps at the dash/control unit flashes at the same time. When pushing the orange button in for 3 seconds it stops flashing, but no heat is in...
by Magic Wand
Mon Apr 23, 2018 8:31 pm
Forum: Technical discussions
Topic: 990 Power Commander 5 & Tune ECU custom maps
Replies: 2020
Views: 327209

Re: 990 Power Commander 5 & Tune ECU custom maps

kevxtx wrote:
Mon Apr 23, 2018 10:21 am
#15 should have more opening on the second flies.
-

Thank's for answer Kev.
But I don't understand exactly what you meen; are you saying that the shafts (without second flies) are more open with map #15?
Is that always, through the whole rev range?

/M
-
by Magic Wand
Sun Apr 22, 2018 7:46 pm
Forum: Technical discussions
Topic: 990 Power Commander 5 & Tune ECU custom maps
Replies: 2020
Views: 327209

Re: 990 Power Commander 5 & Tune ECU custom maps

Hi Kev!

Could you please tell me what the difference is between the #14 and #15 maps? I cant see the difference.
Thanks!

/M
-
by Magic Wand
Tue Apr 17, 2018 3:26 pm
Forum: Technical discussions
Topic: K&N air filter
Replies: 1
Views: 213

Re: K&N air filter

Hi there !! Nice to see that you are alive, and the bike too! :-) You know I used K&N airfilter when I tried the Dominator's, but just today I talked to a guy who strongly recommend NOT to use the K&N air filter! (I have sold my K&N by the way...) He has made some try out's about how much dirt that ...
by Magic Wand
Mon Apr 16, 2018 7:25 pm
Forum: Technical discussions
Topic: 990 Power Commander 5 & Tune ECU custom maps
Replies: 2020
Views: 327209

Re: 990 Power Commander 5 & Tune ECU custom maps

Hi everyone As some of you have already read about, I decided during last spring/early summer to get back to standard/original stuff on my 990 SMt 2010 (Eur). (Did it for some reasons I just woun't tell in this posts. Just accept I didn't like the intake sound using K&N filter and snorkel removed, +...
by Magic Wand
Mon Apr 16, 2018 6:42 pm
Forum: Technical discussions
Topic: Replacement Clutch Master Cylinder (Magura)
Replies: 15
Views: 4231

Re: Replacement Clutch Master Cylinder (Magura)

Hi! To all you guys that want to use the original Magura unit for some further miles (if the unit is still working...) : replace the oil in the clutch system to Front fork oil 5w. Someone suggested that in another thread and I did the replacement. With 55 000 km on the ODO the original clutch master...
by Magic Wand
Sat Apr 14, 2018 7:07 pm
Forum: Technical discussions
Topic: Engine only runs up to half throttle!
Replies: 1
Views: 232

Re: Engine only runs up to halv throttle!

For the ones interested what the problem is/was. The secondary flies does not open when turning the ignition to ON. Something is error but I don't know what or where. I demounted the secondary flies and started the enging and it runs like a wolf! 8-) I had a great ride today, about 400 km in sun and...
by Magic Wand
Fri Apr 13, 2018 1:49 pm
Forum: Technical discussions
Topic: Engine only runs up to half throttle!
Replies: 1
Views: 232

Engine only runs up to half throttle!

Hi all! Bought a Lithium-Ion battery the other day, but the power was too week, so I used jump start cables, from the old battery, and the engine started. Due to the fact I reinstalled original air filter, secondary flies and snorkel I did the 15 min reset imediatelly. (Original map was installed la...
by Magic Wand
Thu Apr 12, 2018 6:44 pm
Forum: Accessories
Topic: Customled.com taillight
Replies: 5
Views: 843

Re: Customled.com taillight

Hi guys! I just put my bike together again (after the anual 'winter-mechanic-work(out)'), and started the engine yesterday ;) But, one of the tail lights/lamp/bulb was down/black so I had to buy a new one today. Actually I bought 2 of them and replaced both - will have the old one as a spare during ...
by Magic Wand
Thu Apr 12, 2018 6:34 pm
Forum: Teething problems
Topic: Issues with rear brake when refitting wheel
Replies: 2
Views: 311

Re: Issues with rear brake when refitting wheel

Hi 'Irn-Bru' I also have some minor problems sometimes when the brake pads are going to take place in the rear brake caliper. But no serious problem though. Is something missing? How about the 'retaining plates'? There is 2 of them, although I'm not 100 % sure they are exactly the same... Still in p...
by Magic Wand
Sat Mar 31, 2018 3:59 pm
Forum: Technical discussions
Topic: How do I replace oil, bushings and seals in front suspension?
Replies: 2
Views: 512

Re: How do I replace oil, bushings and seals in front suspension?

The links above shows the fork legs disassemble of a WP 48 mm for Adventure, and I don't think it's the same front forks at the SMt.

/M
by Magic Wand
Sat Mar 31, 2018 6:53 am
Forum: Technical discussions
Topic: Special tool, front fork renovation?! WP 48 mm
Replies: 0
Views: 245

Special tool, front fork renovation?! WP 48 mm

Hi alla! Happy Easter and so on... ;) I´m doing a front fork renovation. All looks good, but I have already bought the bushings and sealings and have replaced them. Going to put all together, but as the repair manual says; one need a special tool Skärmavbild 2018-03-31 kl. 07.33.55.png Could anyone ...
by Magic Wand
Sun Mar 25, 2018 8:18 pm
Forum: Pictures & Video
Topic: Super duke 1290 vid
Replies: 3
Views: 432

Re: Super duke 1290 vid

Hi 'Johnny Mac'!

Nice vid man :-)

Is it a GoPro camera at the mirror? What model?
The same cam shooting from behind?

I'v got a GoPro Hero 5 Black but cant find a smaller mic than the original BIG son of a b.... ! Is the Zoom Mic compatible with GPH 5 Black?

Thank's!

/Magic
by Magic Wand
Wed Mar 14, 2018 6:04 pm
Forum: Technical discussions
Topic: Tightening forks?
Replies: 2
Views: 372

Re: Tightening forks?

Hi 'bambadoo'! My 2010 SMt has 54600 km on the ODO. Never replaced the oil in the fork tubes, but I'm in the beginning of it right now. SO, if the oil hasn't been replaced for 60000 km I bet it's a good idea to do it. Also replace the slide bushings inside, and seals. For sure, there are options for...